|No. of coats||2-3|
|Coverage||Up to 14m² per litre|
|Drying time||6 hrs|
Sadolin Garden Furniture Stain and Protector is a 2-in-1 wood stain and protective coating for all wooden garden furniture.
Timber surfaces to be treated must be suitably prepared, clean, sound and dry. The moisture content should not exceed 18% prior to coating.
This product is not suitable for use on surfaces where a higher build finish has been used previously. In such cases, all previous coatings should be removed completely and the surfaces treated as 'New Timber'.
Always do a small test area before beginning any project to assess the colour, consistency and compatibility of the finish. Follow the manufacturer's instructions on the tin at all times.
Do not apply if there is a risk of rain, or when air / substrate temperatures are below 8°C or above 25°C, or if the relative humidity is above 80% during application or drying periods. Protect from frost and rain until dry. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.
Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Sadolin Garden Furniture Stain and Protector is supplied ready for use. Do not thin.
Clean brushes and equipment with warm, soapy water and rinse with clean water immediately after use. If spilled, the stain should be removed immediately while still wet, using clean water.
The need for maintenance is indicated by a lightening in colour, reduction in sheen as the coating erodes, and a loss of water-repellent qualities.