Projects (A-Z)
Brands (A-Z)
Osmo Polyx Oil 2K (6125)
Polyx Oil for professional machine application only.
Features and Highlights
- A two-part flooring oil for professional, machine application only
- Ideal for all sanded parquet, block strip, plankwood flooring and more
- Ideal for high traffic areas
- Dries to a clear, satin-matt finish
- Based on a blend of natural oils and waxes
- Safe for humans, plants and animals when dry
- High VOC
| Brand | Osmo |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 50m² per litre |
| Drying time | 4 hrs |
| Size | 1L |
| MPN | 6125 |
| GTIN | 4006850848867 |
Datasheets
Overview
Osmo Polyx Oil 2K Pure is the wood oil of choice for many professional floor fitters. This product is for application using a single disc application and buffing machine only. Fast drying, fast curing and very hard wearing. Perfect for wooden floors, such as solid wood and plankwood flooring, blockstrip, OSB and cork. Ideal for resinous, extractive-rich wood.
Alternative Osmo Products
| Product | Use |
| Osmo Polyx Oil | The original, clear hardwax oil for most interior wooden surfaces |
| Osmo Polyx Oil Tints | Available in wood tone colours, perfect as a base coat or can be intermixed to create different shades |
| Osmo Polyx Oil Raw | Gives your wood the natural "untreated" look |
| Osmo Polyx Oil Anti-Slip | A reduced-slip solution for interior stairs and flooring |
| Osmo Polyx Oil Rapid | Reduced drying times for for when speed is of the essence |
| Osmo Polyx Oil Express | Osmo's fastest ever drying product |
Preparation
Wooden surfaces to be treated with Polyx Oil 2K must be clean, dry (max. 20% moisture content) and free from surface dirt and debris.
- Small holes and cracks can be filled with a suitable wood filler
- Any existing coats of varnish must be fully removed back to bare wood prior to applying Polyx Oil Pure 2K
- Surfaces should be sanded back using a 120 - 150 grit sandpaper
- Carefully remove all traces of sanding dust prior to oiling
Application
Always do a test area before starting any project and follow the manufacturer's instructions on the container at all times.
Osmo Polyx Oil 2K Pure is not ready to use. Add the hardener shortly before application. Please ensure that the packaging of the hardener is completely emptied and that both components are mixed thoroughly. Do not thin.
Please Note: Only when the surface is ready should the hardener be mixed with the oil due to the short working time (approximately 90 Mins) of the product.
- Apply Osmo Polyx Oil 2K with the Osmo Double Blade Scraper, going along the grain.
- Wait approximately 30-40 minutes to allow the oil to penetrate into the surface of the wood
- Massage product into the surface of the wood using a single disc machine with the green pad and in the corners and hard to reach areas, use Osmo Professional 2K Green Floor Superpad and Osmo Floor Pad Holder. For smaller areas, use an Osmo Green Hand Superpad
- Directly after this repeat the process with a second coat
- Using an Osmo Floor Buffing Pad, spread the finish evenly across the floor surface
Tip: If the buffing machine starts to leave streaks because of over-application of the oil, try turning the pad over or replacing it.
Aftercare
Regular Cleaning
Surfaces finished with Osmo Polyx Oil 2K Pure are easy to clean and maintain. A broom, vacuum cleaner or microfibre mop, such as Osmo Micro Mop can be used for day-to-day floor care.
The floor may also be damp-mopped using the Osmo Spray Mop and Osmo Wash and Care added to the water.
Deep Cleaning
For refreshing or intensive cleaning we recommend Osmo Liquid Wax Cleaner. A higher level of sheen can be achieved by polishing the Liquid Wax Cleaner after thorough drying. Trial application is recommended.
Repair
Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Polyx Oil 2K - no sanding or removal of previous Polyx Oil finish required. No repair marks will be visible if applied thinly and appropriately.
Back