|No. of coats||2|
|Coverage||Up to 10m² per litre|
|Drying time||1 hr|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Ronseal Quick Drying Decking Stain is a pigmented decking stain that colours and protects a wide range of wooden decking. Ingredients in the newly treated coating are activated and rise to the surface when it first rains, creating a protective barrier.
Decked areas to be treated must be clean, dry and free from traces of dust, dirt, oil, grease, wax and silicone.
For all bare wood decking including tanalised, pressure treated and preservative impregnated decking timbers.
Hardwood decking usually requires a period of weathering to allow the surface grain to open up. This allows for better adhesion of the decking stain. Check the decking manufacturer's guidance on how long decking should be left to weather before treating.
Old 'coating' type finishes such as decking paints, varnishes and varnish type stains must be fully removed back to bare wood before oiling. Depending on the condition and type of finish, it may require more than one attempt to fully remove the old coating.
Please Note: Ronseal Quick Drying Decking Stain is not compatible with garden decking that has been previously oiled as the oil in the timber will prevent the decking stain from bonding. Previously oiled decking boards should be allowed to weather for at least a year and scrubbed with methylated spirit before attempting to apply this product.
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Do not apply in wet conditions or if rain, frost or snow is likely before the product is dry. Decked areas should be completely dry before application. Stir the decking stain thoroughly before and periodically during application.
To preserve the look and performance of the stained finish for longer it is recommended that decking boards are swept with a stiff broom on a regular basis. This is to remove loose leaves, dirt and other organic matter that can settle on the deck and in the grooves, which can degrade or damage the finish and decking timbers over time.
If signs of mould or algae appear, use an appropriate garden decking cleaner. The condition of decking should be inspected on a regular basis and re-treated with a fresh coat of Ronseal Decking Stain as required.
Scuff marks, stains, grease and other surface contaminates should be cleaned with a suitable decking cleaner.
Inspect the finish on an annual basis and apply a fresh coat of decking stain as and when required.
Stubborn marks and stains may require a light sanding before re-applying a thin coat of Ronseal Quick Drying Decking Stain to the affected area.