|No. of coats||2|
|Coverage||Up to 8m² per litre|
|Drying time||4 hrs|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Ronseal Ultimate Protection Decking Stain is suitable for all types of new and old garden decking.
Decked areas to be treated should be clean, dry and free from traces of dust, dirt, oil, grease, wax and silicone.
For all bare wood decking including tanalised, pressure treated and preservative impregnated decking timbers.
Hardwood decking usually requires a period of weathering to allow the surface grain to open up. This allows for better adhesion of the decking stain. Check the decking manufacturer's guidance on how long decking should be left to weather before treating.
Old 'coating' type finishes such as decking paints, varnishes and varnish type stains must be fully removed back to bare wood before staining. Depending on the condition and type of finish, it may require more than one attempt to fully remove the old coating.
Always do a test area before starting any project to check product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Do not apply in wet conditions or if rain, frost or snow is likely before the product is dry. Decked areas should be completely dry prior to the application of this decking stain.
All white and grey products contain titanium zinc which is heavier than the other ingredients in this product. Because of this, it tends to sink to the bottom of the tin and requires a prolonged period of stirring to ensure that it is blended back in with the other ingredients. It is therefore vital that this product is stirred for several minutes, prior and periodically during application, to ensure that any concentrations or titanium zinc sediment at the bottom of the tin are thoroughly intermixed. Failure to stir before and during application may result in an inconsistent colour or finish.
Two coats of Ronseal Ultimate Decking Stain are usually sufficient but this may vary depending on the type of decking timber and its absorbency.
To preserve the look and performance of the decking stain for longer, it is recommended that decked areas are swept with a stiff broom on a regular basis. This is to remove loose leaves, dirt and other organic matter that can settle on the deck and in the grooves, which can degrade or damage the finish and decking timbers over time.
If signs of mould or algae appear, use an appropriate mould an mildew cleaner or fungicidal wash. The condition of wooden decking should be inspected on a regular basis and treated as required.
Scuff marks, stains, grease and other surface contaminates should be cleaned with a suitable decking cleaner.
Inspect the finish on an annual basis and apply a fresh coat of decking stain as and when required.
Stubborn marks and stains may require a light sanding before re-applying a thin coat of Ronseal Ultimate Protection Decking Stain to the affected area.