|No. of coats||1|
|Coverage||Up to 10m² per litre|
|Drying time||30 mins|
Ronseal Decking Stripper completely removes existing decking stains, oils and other decking coatings from wooden garden decking, leaving it ready for re-finishing.
Please Note: This product is for previously treated decking only. It is not suitable for use on new or bare, untreated wooden decking.
Ronseal Decking Stripper can be applied to dry or damp wood, but not wet or soaked wood. There must be no standing water on the deck as this will reduce the stripping power.
Always do a small test area before beginning any project to assess results. Follow the manufacturer's instructions on the tin at all times.
Do not apply in temperatures above 25°C or below 10°C. Lower temperatures will reduce effectiveness. Do not apply Decking Stripper in direct sunlight or to a hot surface, otherwise it will dry out too quickly.
Shake tin thoroughly before pouring the stripper into a suitable metal or plastic container. Stir before and during use.
Remove as much product as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses.
Once decking is fully dry, as a precautionary measure, clean decking with Ronseal High Performance Decking Cleaner Sachets or Ronseal Garden Cleaner to remove any mould or algae that may still be remaining in the grooves.
If decking is looking grey or weathered, treat it with Ronseal Decking Restorer or Ronseal Decking Cleaner and Reviver. The decking is then ready for re-finishing with a suitable Decking Stain or Decking Oil.