Earthborn Claypaint

Surfaces to be painted must be clean, dry and free from all traces of dirt and debris prior to applying Earthborn Clay Paint.

1. All traces of loose or defective paint should be removed with a stiff brush or scraper
2. Powdery surfaces should be stabilised with a suitable wall sealer
3. Stains which bleed through paint (such as water, nicotine etc.) should be treated with Earthborn Isolating Primer
4. For surface preparation where staining is not an issue, Earthborn Multi Purpose Primer can be used if required
5. Very smooth, non-absorbent surfaces must be sanded back, removing any sanding dust before painting
6. Clay / lime plaster must be moistened before applying Earthborn Clay Paint

Always do a test area before staring any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

Because Earthborn Claypaint is a natural product, there may be subtle variations in shade between batches. Avoid starting a new container in the middle of a wall. If a large area is to be painted that requires several tins, if possible, pour the required number of tins into a single container and mix thoroughly.

Colours within the Earthborn Claypaint range can be inter-mixed to create a variety of colour shades and tones.

Earthborn paints must be stirred thoroughly before and periodically during use.

1. Apply the paint with a good quality synthetic brush, microfibre roller or spray applicator thinly and evenly
2. Spread the paint evenly in all directions
3. Allow each coat to dry for 6 to 12 hours before the next is applied
4. On light-coloured, smooth surfaces 1 coat is normally sufficient
5. For significant colour change, further coats may be required
6. On very absorbent surfaces, such as fresh plaster, use a priming coat of clay paint diluted with up to 20% water and finish with an undiluted final coat

Regular Cleaning

Surfaces should be wipeable after about 10 days. If marked, simply wipe down with a slightly dampened, lint-free cloth. It is also often possible to remove surface marks using a pencil eraser or very fine emery paper.

Maintenance

If the finish begins to look worn over time, simply apply a fresh coat of Earthborn Claypaint, following the Application instructions above.

Q. Are clay paints similar to chalk paints?

A. In general, our customers say that Earthborn Clay Paint has a comparable finish to chalk paint. Customers that have used both products tend to agree that chalk paints almost always require a top coat of wax or other to seal the finish. Clay paints are considered to be more durable, therefore not requiring an additional protective top coat. We do however recommend sealing claypaint with Earthborn Furniture Wax when used on furniture as this provides a more durable finish.

Q. I'm looking for a non toxic nursery paint that is safe for both nursery walls and ceiling. Is Earthborn Clay paint suitable?

A. Earthborn clay paints are breathable, virtually odour free, contain next to no VOC's and meet strict eco standards making them ideal as a nursery paint. Earthborn Claypaint is also ideal for nursery furniture but should be over-coated with Earthborn Furniture Wax for added protection and durability.