Advanced Wood Oils: Protective and Durable

Advanced wood oils is a range of products that offer a more user friendly alternative to Pure Wood Oils. Giving a blended finish that starts with penetrating natural oils and elevates performance by incorporating hard‑wearing resins, natural waxes, UV absorbers, and water‑repellent additives. The results are a finish that sinks into timber like a traditional oil yet cures to a tougher, more scratch‑resistant surface—ideal for busy homes, high‑traffic flooring, and outdoor joinery that faces harsh weather.

Unlike pure oils that can take days to properly cure, advanced wood oils use specialist drying agents to become touch‑dry in as little as two to four hours. The added resins cross‑link within the wood fibres, forming a micro‑thin shield that resists abrasion, household chemicals, and staining. Natural waxes found in Osmo Polyx Oil or Fiddes Hard Wax Oil—such as carnauba or candelilla—polish to a subtle satin sheen and boost water beading, while Ciranova Worktop Oil provides a natural water and stain resistant finish. Because the finish remains breathable, the wood can still adapt to seasonal humidity changes without peeling or blistering.

Advanced wood oils are available in clear formulas that highlight grain or in subtle tints that add warmth, with some products offer additional UV protection. Application is straightforward: Brush, Pad , or Roller on thin coats, wait for the short re‑coat window, and enjoy long‑lasting protection with minimal downtime. Routine maintenance is simple—clean the surface and apply a refresher coat where wear appears—no sanding back to bare wood required.

Each type of advanced wood oil offers the following benefit:

• Polyx Oil - Flexible and durable, suitable for floors and furniture.
• Danish Oil - Deeply Penetrates the wooden surface, ideal for furniture and wooden trim.
• Top Oil - Water resistent, specifically designed for wooden worktops.
• Door Oil - Durable and tough, protects against finermarks, scuffs and dirt.
• Finishing Oil - Resistant to water, heat and foo acids.
• Maintenance oil - Refreshes worn wood.
• Hard Wax OIl - Hard wearing and felexible, similiar to Polyx Oil.

Summary:
Advanced wood oil delivers the deep‑penetration beauty of traditional oils with the durability of modern coatings. The range of products have been designed for specific uses, such as door oil or worktop oil. Quick to apply, easy to maintain, and packed with protective additives, it’s the smart choice for wood that must look great and stand up to everyday life.

Filters

Displaying 7 products

  4.9/5.0  (1750)
The original clear, hard wax oil from Osmo suitable for most interior wood surfaces.
  • 2 coats
  • 24m² per litre
  • 8 hrs drying time
More info
Available in 5ml sample, 125ml, 375ml, 750ml, 2.5L, 10L
  4.8/5.0  (788)
An all-in-one hard wax oil offering exceptional protection. Available in dead matt, matt, satin and semi-gloss finishes.
  • 2-3 coats
  • 24m² per litre
  • 4 hrs drying time
More info
Available in 250ml, 1L, 2.5L
  4.9/5.0  (241)
A high quality, clear danish oil for interior and exterior wood. Ideal for doors, wood turning, oak timbers and much more.
  • 2-3 coats
  • 10m² per litre
  • 6 hrs drying time
More info
Available in 250ml, 500ml, 2.5L, 5L
  4.7/5.0  (86)
A premium grade door oil that enhances and protects solid wood, engineered and veneered interior doors. Dries to a natural matt finish.
  • 2 coats
  • 24m² per litre
  • 4 hrs drying time
More info
Available in 500ml, 1L
  4.3/5.0  (24)
A blend of high quality oils which nourish and enhance the natural character of interior wood including furniture, doors and more.
  • 3-10 coats
  • 12m² per litre
  • 5 hrs drying time
More info
Available in 250ml, 500ml, 1L, 5L
A fast drying maintenance oil suitable for use with oiled wooden surfaces
  • 1 coat
  • 60m² per litre
  • 4 hrs drying time
A worktop oil that provides a natural water and stain resistant finish
  • 2 coats
  • 35m² per litre
  • 6 hrs drying time
More info
Available in 500ml