Click to show product image
Swatch Image for Sikkens Cetol Novatech
Sikkens Cetol Novatech

Sikkens Cetol Novatech

How much will I need?
x
Enter area above for 2 coats (Standard Protection)

Wood type and application can vary coverage

£59.59 - £98.50
You can still order and we'll send your goods as soon they're in stock. You can also set up a stock email reminder
Quantity
FREE Delivery over £60.Order by 4pm for next day option*
A high solid, coating for exterior wood. Outstanding durability, penetration and adhesion.

Features

  • This product is mixed to order so cannot be returned
  • A solvent-based high solid woodstain for exterior softwood and hardwood
  • Suitable for use on cladding, structural woodwork and summerhouses
  • Excellent penetration and adhesion
  • Mould, Algae and UV resistant
  • Dries to a translucent, semi-gloss finish
  • High VOC
Brand
Drying time
24 hrs
Coverage
Up to 27 m2 per litre
No. of coats
1-2
Size
2.5L 5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option

Customers Also Bought

Osmo Soft Tip Brush
(192)
£3.35 - £14.91
Barrettine Methylated Spirit
(65)
£5.11 - £24.98
Osmo UV Protection Oil Extra
(1418)
£1.55 - £293.25

Overview

Overview

Back

Sikkens Cetol Novatech is designed for the decoration and protection of wooden constructions with large surface areas, such as front cladding, smooth, planed fencing, structural woodwork, wooden buildings and chalets.

The high solids, low build technology of Cetol Novatech results in exceptional flexibility and absorption, making it particularly suitable for 'semi-stable' substrates such as cladding and fencing. Ideally suited for application to softwoods, keeping a 'wet edge' for longer.

Preparation

Preparation

Back

Ensure that surfaces to be treated are clean, dry and free from dust, dirt or any other surface contaminants. Application conditions should be between 5°C and 30°C, relative humidity must be no more than 85%. The moisture content of timber to be coated should not exceed 16%.

Bare or New Timber

  1. Degrease any exposed bare timber surfaces by wiping with a cloth dampened with methylated spirits
  2. Remove any resinous deposits with a scraper
  3. Fill any holes or gaps with a suitable wood filler
  4. Knotting solution may be used to reduce extractive discolouration, however, knotting solutions are not always effective in 'sealing in' the resin

Previously Coated Surfaces

  1. De-nib using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain
  2. Do not break through the surface coating and remove all sanding dust
  3. Where there is localised damage, or deterioration has occurred as a result of exposure of the factory coating for longer than 3 months affected areas should be thoroughly sanded back to a sound substrate and treated as 'New Timber'

Old Timber

  1. All damaged or decayed timber must be removed and replaced, cutting at least 25mm into sound timber
  2. When splicing in new sections of wood, consider whether the timber species' natural durability is sufficient
  3. Ensure to thoroughly treat timbers, especially in any end grain sections and ensure all materials are fully dry before splicing in
  4. Secure with non-ferrous fixings and fill any surrounding voids with a good quality wood filler

Application

Application

Back

Sikkens Cetol Novatech is ready for use straight from the tin and does not require thinning. Stir thoroughly before and during use to ensure a consistent finish.

  1. Apply using a good quality, synthetic bristle brush in the direction of the wood grain
  2. Excess surface product may be re-distributed for anywhere up to 20 minutes, depending on conditions
  3. Where possible, the first coat should be applied to all parts of the component prior to fixing
  4. Allow 24 hours drying time
  5. For non-joinery, such as cladding and planed timber fences, finish with 1 further coat of Sikkens Cetol Novatech
  6. For best results, it is necessary to keep the interval between application of the individual coats as short as possible - this interval should not exceed one month

Aftercare

Aftercare

Back

Maintenance

For best results, it is recommended that the Cetol Novatech is re-applied every 2-3 years.

  1. When looking to maintain the coating, take note of the current condition of the finish
  2. Then clean, degrease with methylated spirit and sand to create a key
  3. If excessive weathering has occurred leaving a grey appearance, the surface must be abraded back to clean bare timber before re-coating

Datasheets

Reviews

Reviews

Back
10 customer reviews
4.3/5.0
based on last 18+ months
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 star
0
4/5
Very Satisfied
Very polite and knowledgeable staff. I ordered a large quantity of paint, of which they didn't have enough in stock but they managed to get them delivered to me on time regardless.
Mike Bellot. Light Oak - 006, 5L (22/08/24)
5/5
Excellent
Excellent product but a bit on the pricey side
Howard Savage. Dark Oak - 009, 2.5L (16/05/21)
5/5
Superb product
This really is super stuff. Not the cheapest but gives excellent coverage with one coat, much enhanced by a second. Would recommend and certainly buy again.
James Drennan. Teak - 085, 5L (26/01/21)
5/5
Looks good, easy to apply
I will be looking to purchase more at a good price.
Peter Hall. Mahogany - 045, 2.5L (22/09/19)
5/5
REally top quality product Not cheap but you get what you pay for
It does exactly what it says on the tin!
Geoff Pringle. Dark Oak - 009, 5L (22/07/19)
5/5
Good solid product, wears well
Goes a long way, lasts well and leaves a solid finish.
Scott. Light Oak - 006, 5L (08/07/19)
5/5
Good company to deal with and very good price
One of the best brands out there, cant fault it.
William Hurd. Mahogany - 045, 2.5L (12/02/19)
5/5
Brilliant delivery and order
Great company and good prices too. Speedy tracked delivery as well.
Matt. Teak - 085, 5L (14/11/18)
5/5
Very good
I have been using this product for years very good
Absolute Kitchens. Light Oak - 006, 5L (04/05/18)
5/5
Good price and quick delivery
This product is excellent. Easy to use and a superb finish.
Albert Markham. Teak - 085, 2.5L (04/12/17)