|No. of coats||1-3|
|Coverage||Up to 12m² per litre|
|Drying time||24 hrs|
|Size||1L, 2.5L, 5L|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Sikkens Cetol HLS Plus is perfect for use on softwoods, hardwoods, plywood, block board and particle board, claddings, fascias, architraves, timber frames, fences and sheds. Can be used on its own or when applied to joinery such as windows and doors, it is recommended to over-coat with Sikkens Cetol Filter 7 Plus.
Please Note: This product cannot be used on substrates which have had water-repellent wood preservative or pre-treatments applied, i.e. products that contain wax, oil or silicone. It has been designed for use on smooth wooden surfaces only.
When used as a standalone product, 3 coats are recommended. When used in conjunction with Sikkens Filter 7 Plus, just one coat of Sikkens Cetol HLS Plus should be applied then overcoated with 2 coats of Sikkens Filter 7 Plus
Please Note: This product is mixed to order, so unfortunately cannot be returned. This does not affect your statutory rights.
Timber to be treated should be clean, dry and free from any dust, dirt, debris and surface coatings such as paint or varnish.
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Application temperature should not be below 5°C or exceed 30°C and a relative humidity of 85%. Ensure tin is stirred thoroughly before and during application. This product is not suitable for spraying.
As a standalone product, usually for rough sawn timber such as cladding, fascias and soffits, apply 3 coats. For joinery, such as doors and windows, apply as below: -
For cladding and fascias and other surfaces treated with just Sikkens Cetol HLS Plus: