Ronseal High Performance Wood Filler

Ronseal High Performance Wood Filler can be drilled, sanded, planed, carved, screwed and filed once dry. It is easily mixed with the supplied catalyst and simple to push in with a filling knife.

Please Note: Due to the nature and different absorbency levels of wood, the filler may stain / varnish differently to the surrounding wood. This product is not suitable for gaps between floorboards.

• Looking for an alternative wood filler for smaller repairs? Try Ronseal Multi Purpose Wood Filler

Ensure areas to be filled are clean, dry and free from loose dirt or other contaminants.

• Any loose flaking paint or varnish must be removed, and the area lightly sanded before application
• Softened wood, such as that caused by wet rot, should be removed and replaced with new wood if possible or treated with Ronseal Wet Rot Wood Hardener, which strengthens and reinforces rotten fibres to provide a solid base for wood fillers

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Initial Procedure

1. Measure out a 38mm line of catalyst using the measure on the spreader included in the pack
2. Using a folding action, mix a golf ball equivalent volume of Ronseal Wood Filler, approximately 38mm diameter, with an approximate pea-sized amount of the catalyst
3. The plastic lid is a good base for mixing
4. Mix until filler and catalyst are thoroughly combined and uniform in colour

Application

1. Apply Ronseal High Performance Wood Filler with a filling knife, working well into the damaged area, and removing any excess
2. Working time is approximately 10 minutes
3. Leave the filler slightly proud for sanding
4. After 20 minutes, the filler can be carved or shaped with a modelling knife
5. After 30 minutes, it can be sanded, planed or filed

Please Note: Large, deep repairs may require longer to dry. Do not return mixed filler back into the pack.

Once Ronseal High Performance Wood Filler has set and has been sanded, a suitable paint, stain or varnish may be applied.