Sandtex Ready Mixed Masonry Filler

Preparing the surface properly will help the filler adhere well and produce a smooth, long lasting repair. Ensure the area is clean, dry and free from any loose or flaking material before application.

• Remove loose masonry, dust, dirt and any peeling paint from the repair area.
• Take extra care when removing old paint, as coatings applied before the 1960s may contain lead. Avoid creating dust and follow appropriate safety guidance when preparing these surfaces.
• Use Sandpaper Sheets or scrape back rough edges with a Filler Knife to create a sound surface for the filler to bond to.
• Allow surfaces to dry thoroughly before filling, particularly if they have been cleaned beforehand.
• Treat any mould or algae with Sandtex Fungicidal Wash before carrying out repairs.

Sandtex Ready Mixed Masonry Filler is easy to apply and creates a smooth, paint ready repair. For the best results, apply in dry conditions and allow sufficient drying time before decorating.

• Always test on a small inconspicuous area before starting your project to check suitability and compatibility.
• Apply the filler directly from the tub using a filling knife or spreader, pressing it firmly into the repair.
• For deeper repairs, build up the filler in layers of no more than 9mm, allowing each layer to dry before applying the next.
• Smooth the surface as you work to minimise sanding once the filler has dried.
• Allow at least 16 hours for the filler to dry thoroughly before sanding if required and applying masonry paint.
• Clean tools immediately after use with warm soapy water and reseal the tub to help prevent the filler from drying out.

• What can Sandtex Ready Mixed Masonry Filler be used for?
  Sandtex Ready Mixed Masonry Filler is suitable for repairing small holes, cracks, chips and damaged areas in exterior masonry, brick, stone, concrete and render before painting.
• Can Sandtex Ready Mixed Masonry Filler be used outdoors?
  Yes. It has been specially developed for exterior masonry repairs and provides a durable repair that can be painted once fully dry.
• How deep can I fill with Sandtex Ready Mixed Masonry Filler?
  Deep repairs should be built up in layers of approximately 9mm, allowing each layer to dry before applying the next to achieve a strong, stable repair.
• Can I paint over Sandtex Ready Mixed Masonry Filler?
  Yes. Once the filler has dried thoroughly, it can be sanded smooth if required and overcoated with a suitable exterior masonry paint.
• What colour does Sandtex Ready Mixed Masonry Filler dry?
  The filler dries to a white finish, making it easy to cover with most masonry paints.
• Is Sandtex Ready Mixed Masonry Filler suitable for repairing render?
  Yes. It is ideal for filling small cracks, chips and damaged areas in exterior render before decorating.
• Can Sandtex Ready Mixed Masonry Filler be used on brickwork and concrete?
  Yes. It adheres well to brick, concrete, stone and other sound masonry surfaces, making it suitable for a wide range of exterior repair projects.
• Can Sandtex Ready Mixed Masonry Filler fill hairline cracks?
  Yes. It is suitable for repairing hairline cracks as well as larger holes and damaged areas. Ensure the surface is clean and free from loose material before application.
• Does Sandtex Ready Mixed Masonry Filler need sanding?
  Sanding is not always necessary, but lightly sanding once fully dry can help achieve a smoother finish before painting if required.
• Can Sandtex Ready Mixed Masonry Filler be used indoors?
  Although designed primarily for exterior masonry repairs, it can also be used on suitable interior masonry surfaces where a durable filler is required.