Rust-Oleum CombiColor Original Satin

Rust-Oleum CombiColor Original Satin is a solvent based all in one paint containing rust inhibitive pigments suitable for metal surfaces. It can be applied directly onto manually derusted surfaces with no separate primer needed and can dry in temperatures as low as 5°C, making it a flexible paint that covers a wide range of applications.

If a Gloss finish is required, then please visit Rust-Oleum CombiColor Original Gloss and a suitable thinner to help with cleaning is Rust-Oleum CombiColor Thinner

If the paint is being applied to a metal structure in an aggressive industrial environment then the use of Rust-Oleum CombiPrimer Anti-Corrosion Primer is recommended.

Please note: The product is labelled as Satin Gloss, however the paint will provide a satin sheen finish

Ensure the metal surface is free of debris such as flaking paint or rust and the surface is clean and smooth.

• Remove any corrosion or rust with either a wire brush, sanding or light blast cleaning
• Repair any gaps or holes with a suitable product for the project
• Sand any previous coats to help the paint adhere to the surface
• Remove oil, grease and any other contaminants from the surface
• Galvanised aluminium and zinc surfaces need to be primed to provide adhesion for the paint
• Ensure you have the right tools for the project as the paint can be applied either by brush or roller

Please be aware of the following drying times before application

• Touch dry: 2 hours (20°C), 3 hours (10°C), 1½ hours (30°C)
• Dry to handle: 8 hours (20°C), 16 hours (10°C), 6 hours (30°C)
• Dry to recoat: 16 hours (20°C), 24 hours (10°C), 8 hours (30°C)
• Fully cured: 7 days (20°C), 14 days (10°C), 5 days (30°C)

Always do a test area before starting any project to check suitability and compatibility. For the best results follow the manufacturers instructions

• Guarantee Rust-Oleum CombiColor Original Satin is thoroughly mixed and blended
• The paint can be applied either with a brush or a roller and ensure the strokes are producing an even covering in all directions
• Allow 16 hours for the paint to dry before applying a second coat
• If painting over a previous coat of paint, a second coat might need to be applied to attain a solid and opaque finish