|Size||6" (152mm), 10" (254mm)|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Padco Classic Pad Refill is for use with the Padco Classic Pad Applicator.
Please Note: This product is not suitable for most solvent-based products as these will dissolve and melt the glue that holds the paint pad together. Many wood oils also contain solvents which may break down the glue in the pad if it is submerged in the oil. To prevent this from happening, only dip the surface of the pad into the wood finish, never submerge the whole pad into the finishing product.
Ensure that the paint pad is clean and dry before use to avoid cross contamination of products. If not, use an appropriate cleaner and allow to dry thoroghly before use.
After use, ensure that the Padco Classic Pad Refill is cleaned with an appropriate cleaner to remove all contaminants. This will prolong the life of the applicator pad.
As a guide, water-based products can usually be cleaned using warm soapy water. Solvent-based products are normally cleaned with white spirit or a dedicated brush / pad cleaner, but keep in mind to only clean the surface and never submerge the pad in the cleaning solution, as explained in the Overview above. Always refer to the cleaning instructions on the tin of the product being applied.