Click to show product image
Swatch Image for Mylands Marble Matt Emulsion
Mylands Marble Matt Emulsion

Mylands Marble Matt Emulsion

Colour
Select a Colour
How much will I need?
x
Enter area above for 2 coats (Recommended)

Wood type and application can vary coverage

£5.75 - £120.00
You can still order and we'll send your goods as soon they're in stock. You can also set up a stock email reminder
Quantity
FREE Delivery over £60.Order by 4pm for next day option*
A water-based acrylic emulsion paint for interior use.

Features

  • This product is mixed to order so cannot be returned
  • Suitable for all interior walls and ceilings
  • Excellent coverage properties
  • Matt finish with low 3% sheen level
  • Washable
  • Mould Resistant
  • Moisture Resistant
  • Low V.O.C
Brand
Coverage
Up to 15 m2 per litre
No. of coats
2
Size
100ml Sample 250ml 1L 2.5L 5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option

Customers Also Bought

Farrow and Ball Estate Emulsion
(2)
£5.50 - £98.00
Mylands Wall Primer
(0)
£45.00 - £124.00
Earthborn Claypaint
(95)
£5.40 - £85.00
£5.40 - £102.50

Overview

Overview

Back

Mylands signature paint is made using super fine ground marble powder for a natural but hard-wearing finish.

Rich in colour and beautifully flat, Mylands Marble Matt Emulsion is suitable for all rooms including high traffic areas: hallway, kitchen, bathroom, utility/boot room, children's rooms and other areas of high use and can be re-touched, wiped, washed or even scrubbed with no effect on colour or sheen.

Please Note: This paint is not suitable for woodwork, except painted decorative furniture, apply wax on top of emulsion.

Preparation

Preparation

Back

To achieve the best quality results, establish that the surfaces are structurally sound, free of imperfections such as dust, dirt, flakes or any other surface contaminants.

Application

Application

Back

Always perform a test area before starting any project to judge the suitability, effectiveness and finish of the product.

This paint has a high pigmentation. It can be thinned up to 45% and still be used as a second or third coat for a fine finish.

On porous surfaces (e.g. bare plaster): thin the first coat with up to 30% water. Slightly porous surfaces: thin first coat with up to 15% water.

  • Do not use in extremes of temperature
  • Use between 8°C and 30°C
  • Stir well before use
  • This product is formulated for brush or roller application
  • Recoat in 3 - 4 hours