Morrells Induro XLA Anti-Slip Floor Varnish

Morrells Induro XLA Anti-Slip Floor Varnish

How much will I need?
x
Enter area above for 4 coats (Ultimate Protection)

Wood type and application can vary coverage

£115.03
You can still order and we'll send your goods as soon they're in stock. You can also set up a stock email reminder
Quantity
FREE Delivery over £60.Order by 4pm for next day option*
A water-based, 2-component, ultra tough and durable anti-slip floor varnish for all types of flooring. 99% kill rate on E.Coli and MRSA within 1 hour.

Features

  • A water-based, 2-component, anti-slip floor varnish for high wear soft wood and hardwood flooring
  • Perfect for care homes, restaurants, offices, retail spaces and other high-traffic areas
  • 99% kill rate on E.Coli and MRSA within 1 hour
  • Great chemical and mechanical resistance
  • Extremely strong and durable
  • Medium VOC
Brand
Drying time
2h 30m
Coverage
Up to 8 m2 per litre
No. of coats
1
Size
5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option

Customers Also Bought

Morrells Light Fast Wood Stain
(182)
£18.36 - £64.83

Overview

Overview

Back

As of 24 August 2023, adequate training is required before industrial or professional use of this product. Further information available at www.feica.eu/PUinfo or www.safeusediisocyanates.eu

Morrells Induro XLA Anti-Slip Floor Varnish is a two-component, water-based, 100% polyurethane anti-slip, floor varnish. This product range is ideal for use in areas of high traffic levels and where there is an increased risk of scuffing and spillages. Perfect for use in schools, restaurants, retail premises and domestic properties that require extra protection.

Tested to BS 7976-2 (Wet and Dry slip resistance) to conform with UK slip resistance guidelines.

When used in conjunction with Morrells Induro General Purpose Sealer they produce finishes with excellent clarity and a woodwarming effect.

It also offers protection against E-coli.MRSA, Salmonella, Listeria and other harmful bacterial with a 99% kill rate within 24 hours.

Preparation

Preparation

Back

Ensure that floors to be varnished are clean, dry and free from dust, dirt or any other surface contaminants.

  1. All previous finishes must be completely removed back to bare wood by stripping or sanding the wood
  2. Fill any gaps or splits in the wood surface with Morrells Two-Part Coloured Wood Fillers or other suitable wood filler
  3. New wood can be cleaned and degreased with methylated spirit if required
  4. Freshly sanded floors should be swept and vacuumed to remove all traces of sanding dust, dirt and debris
  5. Prior to varnishing, softwood floors can be stained with Morrells Light Fast Wood Stain if desired
  6. The application of Morrells Induro General Purpose Sealer or Morrells Induro Isolating Sealer, prior to varnishing is recommended for better adhesion to the substrate

Application

Application

Back

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.

Morrells Induro XLA Floor Varnish comes supplied with enough catalyst / hardener for the 5 litres of lacquer. If part mixing, use 9 parts lacquer to 1 part catalyst.

  1. Recommended application is with a short pile roller. Mohair Flooring pads or T-bar applicators can also be used
  2. For domestic environments: Prime with Morrells Induro General Purpose Sealer or Morrells Induro Isolating Sealer, then 1 coat of Morrells Induro XL2 Floor Varnish, then 1 top coat of Induro XLA Anti-Slip Floor Varnish
  3. For commercial environments: prime, then 2 coats of Induro XL2 Floor Varnish, then 1 top coat of Induro XLA Anti-Slip Floor Varnish

Alternatively, the initial coat of primer can be replaced with an extra coat of Induro XL2.

Application brushes and equipment should be cleaned immediately after use with warm, soapy water and wiped dry.

The chosen primer should not be lightly sanded, or denibbed, however the coats of Induro XL2 should be denibbed between coats to aid adhesion.

Once final coat has dried, light traffic can be resumed after 24 hours. Do not place furniture or move furniture across the floor surface for at least 3 days after application. Avoid mats, rugs or floor coverings for the first 5 days as this will impede final cure and general performance of the product.

Please note: Once the catalyst has been mixed with the lacquer, it has a usable open time of 5 hours. It is recommended that only the amount required for each coat is mixed at any time to avoid product wastage.

Aftercare

Aftercare

Back

Morrells Induro XLA Anti-Slip Floor Varnish will typically require 7 days to reach full hardness, so wet cleaning and vacuuming should be avoided until after this period.

The use of good quality entrance mats and furniture pads are recommended to avoid damage to the finish. Surfaces should be swept or vacuumed regularly to avoid the build up of dust or grit as this becomes abrasive and will degrade the finish over time. A soft cloth or mop lightly dampened with a dedicated wood floor cleaner and water can also be used, as and when required.