|No. of coats||4|
|Coverage||Up to 8m² per litre|
|Drying time||2h 30m|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Morrells Induro XL2 Floor Varnish is a cross-linking, 100% polyurethane floor varnish, offering enhanced performance characteristics compared with single pack varnish. This product range is ideal for use in areas of high traffic levels and where there is an increased risk of scuffing and spillages. Perfect for use in schools, restaurants, retail premises and domestic properties that require extra protection.
When used in conjunction with Morrells Induro General Purpose Sealer these products combine to produce a floor finish with excellent clarity and a woodwarming effect.
The finish also offers protection against E-coli.MRSA, Salmonella, Listeria and other harmful bacterial with a 99% kill rate within 24 hours.
Ensure that floors to be varnished are clean, dry and free from dust, dirt or any other surface contaminants.
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.
Morrells Induro XL2 Floor Varnish comes supplied with enough catalyst / hardener for the 5 litres of lacquer. If part mixing, use 9 parts lacquer to 1 part catalyst.
Application brushes and equipment should be cleaned immediately after use with warm, soapy water and wiped dry.
Once final coat has dried, light traffic can be resumed after 24 hours. Do not place furniture or move furniture across the floor surface for at least 3 days after application. Avoid mats, rugs or floor coverings for the first 5 days as this will impede final cure and general performance of the product.
Please note: Once the catalyst has been mixed with the lacquer, it has a usable open time of around 5 hours. It is recommended that only the amount required for each coat is mixed at any time to avoid product wastage.
Morrells Induro XL2 Floor Varnish will typically require 7 days to reach full hardness, so wet cleaning and vacuuming should be avoided until after this period.
The use of good quality entrance mats and furniture pads are recommended to avoid damage to the finish. Surfaces should be swept or vacuumed regularly to avoid the build up of dust or grit as this becomes abrasive and will degrade the finish over time. A soft cloth or mop lightly dampened with a dedicated flooring cleaner and water can also be used, as and when required.