Liberon Wax Polish Paste Black Bison

Liberon Wax Polish Paste Black Bison is a blend of waxes specially formulated to give a superb, fine finish on all interior woods, either bare or over an existing finish, including lacquers and French polishes.

Well known for its quality and distinctive, pleasant smell, it is traditionally used on antiques, but is also suitable for use on modern furniture.

Use Neutral or Clear to give a soft sheen to antique or modern sealed furniture. To enhance, enrich or darken faded wood, choose the appropriate colour. Wax Polish Paste can be used just as effectively as a finish on turned items, giving an enhanced colour and shine to sealed wood.

• Also available in a liquid wax polish: Liberon Liquid Wax Polish Black Bison
• Looking for an alternative wax or polish? See our full range of Liberon wood waxes and Liberon wood polishes

Ensure that the surface to be treated is clean, dry and free from dust, dirt and any other surface contaminants.

• Remove old waxes and dirt with Woodleys Wax and Polish Remover if necessary
• Repairs to any holes, gaps or other surface imperfections can be made with the appropriate Liberon wood filler or touch-up product

Always do a test area before starting any project, to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.

1. Apply Liberon Wax Polish Paste Black Bison sparingly with a lint-free cloth on a delicate / French polished surface
2. If a deeper penetration of wax polish is required, apply with Liberon Ultra Fine (0000) Steel Wool
3. Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cloth or furniture brush
4. Apply further coats as above, wiping off any excess
5. It is recommended to apply a minimum of two coats on new or very dry wood
6. Build-up to the desired level of sheen by applying thin coats of wax, buffing between coats
7. For best results, buff with a suitable buffing brush, once the last coat has dried

Maintenance

Wipe over the surface with a lint-free cloth or duster. If the surface starts to look tired and dull, re-wax with Liberon Wax Polish Paste Black Bison as required.

Please Note: Do not wash the finished surface with water or household cleaners and detergents, as these will damage the finish.

This could be down to the application. The benefit of using a wax is that it is a surface coating, so it is easily rectified. Using a Woodleys Stockinette Cloth try reapplying a small amount of wax in circular motions to help work the wax into the wood. This should remove streaks to the finish.