Projects (A-Z)
Brands (A-Z)
Hammerite Direct to Rust Metal Paint Satin Finish
£9.99 - £42.95
Quantity
|
|
FREE Delivery over £60.
Order by 5pm for next day option*
Order by 5pm for next day option*
A specially formulated metal paint offering up to 8 years protection. Suitable for interior and exterior use and can be applied with minimal surface preparation.
Features
- Corrosion resistant decorative paint for exterior use
- Applies directly to rusty metal
- No need for primer or undercoat
- Dries to a high quality, smooth satin finish
- Solvent based with a high VOC
| Brand | Hammerite |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 5m² per litre |
| Drying time | 4 hrs |
| Size | 250ml, 750ml, 2.5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Previous
Next
Overview
Hammerite Direct to Rust Metal Paint satin finish is a tough and durable, decorative paint for exterior projects. It can be used for either ferrous or non-ferrous metals and is ideal for use on metal doors, gates, railings, garden furniture and more. It can be applied directly on to rusted metal surfaces with virtually no surface preparation needed and offers up to 8 years protection.
If a gloss finish is required then please visit Hammerite Direct to Rust Metal Paint Smooth Finish
Preparation
For the best results, ensure surfaces to be coated are sound, clean and free from all defective or poorly adhering material such as dirt, grease, rust or paint.
- Put down dust sheets to protect anything you don't want to get paint on
- Remove any loose rust, corrosion or flaking paint prior to coating, using a wire brush, sanding or light blast cleaning
- If the metal surface is already painted then clean with a suitable detergent and thoroughly rinse
- Lightly abrade smooth metal surfaces to form a sound key. Rinse thoroughly and allow to dry
- Repair any cracks or holes with a suitable metal filler and allow to harden
Application
Always do a small test area to assess colour and compatibility of the finish.
- If there is any adverse reaction, this will appear with 1 hour. If a reaction occurs, remove all paint and wash down with a degreaser. Rinse with warm water and allow to dry.
Follow the manufacturer's instructions on the tin at all times.
- Ideally, apply avoiding extremes of temperature, between 8-35°c
- Lightly stir the paint and do not mix vigorously
- Apply using a good quality synthetic brush or microfibre roller
- For best results, 2 thin coats are recommended
- Leave 4 hours drying time between coats
Back