Ronseal Yacht Varnish

Ronseal Yacht Varnish is a traditional outdoor varnish, ideal for use on bare wood or over existing solvent-based finishes, such as varnish. It protects exterior wood against the elements, and it is flexible so it will not crack, peel or blister.

Please Note: This product is not suitable for use on painted wood or decking.

Ronseal Yacht Varnish has been specially formulated for use on external, smooth planed wood.

• Looking for an interior varnish? See the Ronseal Diamond Hard Varnish range

Make sure it's a warm, dry day, above 10°C and that the wood to be varnished is clean, dry and free from dust, dirt and any other surface contaminants.

Bare Timber

1. Lightly sand the surface to remove any loose wood fibres, then clean with a lint-free cloth dampened with methylated spirits and leave to dry before varnishing
2. Any old, decayed, loose wood must be removed before treating the affected area with Ronseal Wet Rot Wood Hardener prior to filling
3. Any existing woodworm can be eradicated with Ronseal Woodworm Killer
4. Fill any gaps in the wood with Ronseal High Performance Wood Filler or Ronseal Multi Purpose Wood Filler

Previously Stained or Varnished Timber

1. All varnish in loose or poor condition should be removed with a scraper or a dedicated varnish remover
2. Sand thoroughly to provide a key to help the varnish stick, then clean with a lint-free cloth dampened with white spirit and allow to dry

Always do a small test area before beginning any project to assess colour and compatibility. Follow the manufacturer's instructions on the tin at all times. Stir thoroughly before and during use.

1. Apply Yacht Varnish evenly with a good quality synthetic brush in the direction of the wood grain
2. Apply 3 coats to bare wood; 2 coats should be sufficient for previously stained or varnished wood
3. Allow 8 hours between each coat
4. Before the final coat, give the surface a light sanding and wipe with a lint-free cloth dampened with meths

Cleaning Equipment

Remove as much varnish as possible from brushes before cleaning. Clean using white spirit or a dedicated paint brush cleaner. Do not empty into drains or watercourses.

Maintenance

If the finish shows signs of wear over time, simply apply a fresh coat of Ronseal Yacht Varnish, following the Preparation and Application instructions above.