Ronseal 10 Year Weatherproof Wood Paint - Satin

Ronseal 10 Year Weatherproof Wood Paint - Satin is a hard-wearing exterior, water-based paint. No separate primer needed. Perfect for use on both previously coated and bare wooden doors, frames and windows. Drip resistant and won't crack, peel or blister for 10 years. Weatherproof 1 hour after the final coat

• Looking for a glossy finish? Why not try Ronseal 10 Year Weatherproof Wood Paint - Gloss

Please note: this product is not recommended for rough sawn wood.

Make sure that wood to be painted is clean, dry and free from dirt, dust and other surface contaminants.

Bare or New Wood

• Fill any holes or cracks with Ronseal High Performance Wood Filler
• Treat any resinous knots with a suitable knotting solution if required
• Lightly sand the wood with P120 sandpaper to ensure a smooth consistent finish
• Sand in the direction of the wood grain
• Remove all traces of sanding dust before painting

Previously Painted Wood

• Old paint that is sound and intact should be lightly sanded with P240 sandpaper to provide a key
• Remove all traces of sanding dust
• Wipe down surface with white spirit to clean and degrease surface and allow to dry
• Paint that has started to crack or peel must be sanded back to bare wood, using P120 sandpaper
• Fill any gaps with Ronseal High Performance Wood Filler
• Then treat as 'Bare or New Wood' above

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturers instructions on the tin at all times.

1. Stir thoroughly before and periodically during use
2. Apply with a synthetic bristle brush, going with the direction of the wood grain
3. Allow 4 hours to dry between coats
4. Apply 2 coats if painting previously coated wood, 3 coats if applying to bare wood

For best results, use lighter colours in areas exposed to high levels of sunlight. The longevity of the finish will vary depending on the paint colour and the type and condition of the timber or existing paintwork. A South-facing position and the level of shade will also affect durability.

Inspect anually for any imperfections. Sand off any loose paint or blisters. Recoat with 2 coats of Ronseal 10 Year Weatherproof Wood Paint - Satin following the instructions above

No, this is only suitable for wood.

Yes, this product can be used on treated softwood. You must treat any resinous knots with a suitable knotting solution before application. Please note that this product is not suitable for decking.

No, exterior products are manufactured to be much more flexible than interior products as they need to cope with the expansion and contraction of the timber, therefore exterior products are not as durable to knocks and scrapes.

Ronseal only mention wood for application surfaces. Why not call our Woodcare Experts on 01303 213838 to discuss your options.

This in an opaque paint which will completely block out the colour underneath, including the filler (if it is paintable.) Check with the fillers manufacturers guidance first if you are unsure, otherwise you may wish to consider Ronseal High Performance Wood Filler which can be painted.

Absolutely, this product is ideal for this project.

We wouldn't recommend this paint on surfaces like garden tables as it may not quite be durable enough for this. Why not consider Protek Royal Exterior Paint instead which will provide much better resistance against cups, plates etc, lasting longer on this type of project.

Once your weatherproof paint has dried, you can clean as normal with warm, soapy water or a diluted all-purpose cleaning solution.