Projects (A-Z)
Brands (A-Z)
A multipurpose UV and moisture resistant glazing sealant for interior and exterior windows. Durable, flexible and does not shrink
Features
- A durable multipurpose glazing sealant for interior and exterior use
- Suitable for glazing new windows and renovation projects
- Compatible with Hot-melt butyl, PVB foils and glazing tapes
- Excellent adhesion to glass, wood, metal and stone
- Seals end grain on exposed timber
- Moisture and UV resistant
- With a permanent elastic structure that will not shrink
- Solvent Free
| Brand | Repair Care |
|---|---|
| No. of coats | 1 |
| Drying time | 2 hrs |
| Size | 290ml |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Overview
Repair Care DRY SEAL MP is a UV and moisture resistant sealant for glazing and bedding-in timber and metal windows, and glazing beads. A multipurpose, durable alternative to linseed oil putty. Its permanent elastic properties means it curves very quickly and is ideal for double-glazing, such as slim-line units, laminated and acoustic glass. It can also be used to fill in nail and screw holes, and can be painted and stained after 2 hours.
Preparation
Ensure that areas to be filled are clean, dry and free from surface dust, loose dirt or other contaminants.
Wood
- Any loose putty must be removed and the area lightly sanded and cleaned before application
- Check the moisture content of the timber, using a Repair Care EASY.Q Wood Condition Meter
- Repair any damaged or rotten timber using the Easy Care, repair range
- Ensure no burnt timber or raised wood fibres, where paint has been removed
- Thoroughly sand back to bare wood, cleaning away all sanding dust
- Prime the surface with a suitable wood primer
Metal
- Any loose putty must be removed and the area
- Ensure surface is free from rust, dirt, moisture, grease and any residual putty, mastic or sealant
- Prime the surface using a suitable metal primer
Application
Always do a small test area before starting any project to assess adhesion and end result. Follow the manufacturers instructions on the container at all times.
Optimum application is achieved between 5°C and 40°C with good air movement and ventilation.
- Insert into the Repair Care EASY.Q Professional Dispensing Gun, cutting the nozzle to form the glazing profile
- Dispense the DRY SEAL on to the prepared surface, avoiding any air bubbles
- Smooth using a Repair Care EASY.Q DRY SEAL Applicator, ensuring a water shedding profile
- Allow 2 hours to fully cure
Please Note: Always wear suitable Protective clothing and Repair Care EASY.Q Disposable Nitrile Gloves.
Finishing
Once cured, the area can be finished within one month using the chosen paint or stain. If finishing at a later date, lightly sand the DRY SEAL surface beforehand.
Back