Projects (A-Z)
Brands (A-Z)
Protek Stable Coat Colour Tester
Try Protek’s exceptional exterior wood toned colours for use on stables and other outdoor animal housings, with these 125ml samples.
Features
Overview
Protek Stable Coat colour testers are the ideal way to explore exterior colour options before committing to a full tin. Suitable for use on surfaces such as stables, fencing and timber outbuildings, these tester pots allow you to see how shades appear in natural daylight and changing weather conditions.
Exterior colours can vary depending on light levels, surroundings and surface texture. Colours often appear lighter outdoors, so it is worth considering a slightly darker tone than you might choose for interior spaces. Testing directly on your surface helps ensure you achieve the right look while avoiding costly mistakes.
It is important to assess your chosen colour in a range of conditions, including bright sunlight, overcast weather, and at different times of day such as morning and evening. This gives a more accurate understanding of how the shade will appear once fully applied.
Using a tester allows you to confidently choose a colour that complements your outdoor space while being suitable for environments such as stables and animal enclosures.
Preparation
Preparation
Back
- Check weather conditions - Only apply in dry conditions, avoiding rain, frost and strong direct sunlight.
- Prepare the surface - Ensure wood is clean, dry and free from dirt, grease and loose material.
- Remove previous coatings - Strip or sand back any flaking or unstable finishes.
- Allow wood to dry - Damp or recently cleaned timber should be fully dry before application.
- Protect surrounding areas - Mask nearby surfaces to prevent splashes and staining.
Application
Application
Back
Apply evenly using a suitable brush or roller, working methodically to achieve a consistent finish.
- Apply in suitable conditions - Avoid painting in damp, humid or very hot weather.
- Apply two even coats - Allow each coat to dry fully before applying the next.
- Maintain a wet edge - Work in manageable sections to avoid lap marks.
- Work with the grain - Apply in the direction of the wood grain for best results.
- Allow full drying time - Drying times may vary depending on temperature and conditions.