Projects (A-Z)
Brands (A-Z)
A ready mixed multi surface repair filler offering strong adhesion to a wide range of surfaces, including ceramics and glass
Features
- Strong adhesion to the substrate making the repair durable and long lasting
- Will adhere to a wide range of materials including, concrete, stone, ceramics such as tiles and even glass
- Once dried the repair will be water and mould resistant, making it ideal for humid conditions
- Dries to a white finish and once fully cured can be sanded flat, ready to be overcoated with a primer
Brand
Drying time
24 hrs
Size
200ml
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Overview
Back
Prestonett Ready Mixed Multi-Surface Repair Filler is an easy to apply filler that can adhere to a wide range of surfaces from brick to plaster and glass to ceramic tiles. Easy to apply with either a pallet or filling knife means the repair will be quick and straight forward with the benefits of being robust and long lasting.
Looking for a powder option? Then try the Prestonett Multi Purpose Interior Filler
Preparation
Preparation
Back
Ensure the project area is clean and clear of loose debris that can hinder the adhesion of Prestonett Ready Mixed Multi-Surface Repair Filler
- Remove any loose debris from the surface and ensure the project area is strong and stable
- Wash the project area thoroughly to remove all traces of dust and debris and allow to dry completely
Application
Application
Back
Always perform a small test area to judge suitability and the final finish. Also, follow the manufacturer's instructions to guarantee the best results possible
- Initially, massage the tube to ensure the mixture is properly mixed and blended
- Fill the cavity, crack or hole from the bottom upwards to guarantee a strong and level seal that avoids trapped air bubbles and weakens the repair
- The use of a pallet or filling knife is recommended, such as the Mako Filler Knife, for applying Prestonett Ready Mixed Multi-Surface Repair Filler to produce a final, smooth finish
- Once fully dried, sand down to a smooth finish ready for the undercoat to be applied