Projects (A-Z)
Brands (A-Z)
PeelAway 1 Neutraliser 1L
Spare 1L neutraliser for use with Peelaway 1 Removal System.
Features
- A concentrated liquid compound that will neutralise alkaline surface residues after using PeelAway1
- This additional spare neutraliser may be required depending on the porosity of the substrate
Brand
Drying time
24 hrs
No. of coats
1-2
Size
1L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
PeelAway 1 Neutraliser is designed to neutralise more porous substrates after using PeelAway 1.
This is an important step in this process, as moisture containing PeelAway 1 residue may bleed out of the substrate and raise the pH of the surface. This will affect not only the adhesive properties of future coatings but their appearance too.
- Not sure which PeelAway system you require? Try our PeelAway 1 and 7 Sample Twin Pack
Customers Also Bought
Preparation
Preparation
Back
Ensure surfaces to be neutralised are clean, completely dry and free from loose dirt and any other surface contaminants.
Application
Application
Back
Always do a small test area to confirm performance and compatibility before starting any project and follow the manufacturer's instructions on the container at all times.
- Mix 1 part Neutraliser with 1 part water
- Pour water into empty bucket then carefully add equal portion of PeelAway Neutraliser
- For plaster surfaces, dilute 4 parts water to 1 part PeelAway Neutraliser
- Pour diluted neutraliser into a garden type pressure sprayer or for smaller areas a hand-held trigger sprayer
- Start at the top and spray the entire surface until saturated
- Do not apply to surface in any way other than spraying as this may contaminate the Neutraliser
- Allow Neutraliser to remain on the surface until dry to the touch, but no less than 6 hours
- Neutralising effectiveness is maximised by scrubbing the surface once the Neutraliser has been sprayed on, but do not scrub plaster or gesso surfaces
- Rinse surface with a steady spray of clean water
- For external use apply sensible water pressure, enough to thoroughly rinse but not damage the surface
- Test pH level of the surface with pH paper
- Most accurate testing is accomplished when the surface has been allowed to air dry for a minimum of 24 hours after the neutralising process (Instructions for using the pH testing papers are attached to the handle of PeelAway 1 Neutraliser container)
- Moisten surface with water and apply a small strip of pH paper to the surface and note colour change and compare with pH charts on the inside of the covers of the pH papers
- Any surface with pH of more than 8 should be re-neutralised and left to dry thoroughly before re-testing
Datasheets
Datasheets
Back
Reviews
Reviews
Back
6 customer reviews
4.9/5.0
based on last 18+ months
5 stars
3
4 stars
3
3 stars
0
2 stars
0
1 star
0
Great at taking the old paint off
Does exactly what it says on the tin
Ann Curtis. , 1L (25/04/24)
Excellent product that is a good neutraliser
I would recommend this to people as it is better than any other
Michael Athow. , 1L (22/07/16)
Very easy
Smells strongly so don't inhale when spraying!
Clare Aston. , 1L (23/12/15)
Amazing product does exactly what it says
Brilliant product ,but make sure you put plenty on.
Robert Hughes. , 1L (05/08/15)
Good product but wear protective clothing if using it
all the peelaway products require you to wear protective clothing and they work well,the neutraliser is like very strong vinegar and if it gets into a cut or graze it does irratate
Darren Barr. , 1L (03/06/14)
I used on my church pew
It did the job, the finish on my church pew I was more than pleased.
George Fry. , 1L (08/10/13)
Product Restock Notification
Enter your email address and we will email you when is back in stock.
Please enter a valid email address
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.