Projects (A-Z)
Brands (A-Z)
Feeds and seals natural and man-made stone slab and tile floors. Waterproofs and protects floors from staining.
Features
- A water-based floor sealer for stone, slate, terracotta and other hard floor surfaces
- Ideal for hard surface kitchen and bathroom floors
- Effective after just one coat on most surfaces
- Ideal for use on new or old stone flooring
- Suitable for interior and exterior floors
- Maintains the natural look of the stone
- Waterproofs and protects from staining
- Resists food oils and grease marks
- Low V.O.C
Brand
Drying time
24 hrs
Coverage
Up to 12 m2 per litre
No. of coats
1
Size
1L
5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Customers Also Bought
Overview
Overview
Back
Liberon Natural Finish Stone Floor Sealer is a highly effective sealer for protecting interior and exterior terracotta, slate, York stone, ceramic (including porous / non-glazed ceramic tiles), marble and other porous stone flooring.
Endorsed by the Guild of Master Craftsmen, Liberon Natural Finish Stone Floor Sealer feeds and seals natural and man-made stone slab and tile floors. When applied, the sealer enhances the natural colour of the stone whilst also reducing crumbling and dusting of the substrait.
Please Note: This product is not suitable for use on previously oiled surfaces.
- For other bare interior wood such as furniture and MDF, consider a suitable wood primer or sealer
Preparation
Preparation
Back
Ensure the surface is clean, dry and free from dust, dirt and any other surface contaminants prior to applying Natural Finish Stone Floor Sealer.
Application
Application
Back
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.
- Apply Stone Floor Sealer generously with a synthetic paint brush or lint-free cloth and allow to dry for one hour
- Check if the surface is properly sealed by dropping a small amount of water onto the floor
- Leave for 10-15 minutes and if the water remains on the surface then enough sealer has been applied; if not then further coats of sealer are required
- Repeat application and testing until the surface is properly sealed
- The number of coats required will depend upon the porosity of the stone
- Allow the final coat of sealer to dry for 24 hours before floors receive foot traffic
Aftercare
Aftercare
Back
Maintenance
Inspect annually and test water repellency by placing a drop of water on the surface. If the water sits on top of the surface and doesn't get absorbed, the product is still working adequately. If the water gets absorbed into the surface, simply re-coat with one fresh coat of Liberon Natural Finish Stone Floor Sealer.
Datasheets
Reviews
Reviews
Back
5 customer reviews
4.9/5.0
based on last 18+ months
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 star
0
Liberon is the best brand you can buy
The 1L goes a long way. I did 2 coats over 14sqm and have a fair bit left. Low odour and dries quick
Helena Kanoute. , 1L (26/04/25)
Brilliant
Delivered promptly and well packed. Will use again
Chris Taylor. , 1L (23/05/20)
Got what I wanted for a competitive price Delivered on time as promised
Bought it to seal magnesite floor built in the 1950s. Magnesite is very porous and we think this product could work to make the floor dust-free, water repellent and easier to clean. Easy to apply but cannot say if it works yet for what we expect it to do. We shall see as the floor wears.
Felicity Khoo. , 5L (20/09/19)
Excellent
Does what it say on the tub seals well dries quickly saves on stains 5*
Diane Maile. , 1L (22/01/19)
Easy product to use
I have used this product previously, I am using it now ,
And no doubt I will use it in the future.
All in all good product
Excellent service.
Rocco Sereno. , 5L (27/02/18)