Projects (A-Z)
Brands (A-Z)
Hammerite Ultima Smooth
A durable long lasting metal paint offering ease of use combined with maintaining a long lasting colour finish
Features
- Up to 12 years protection
- Recoatable in 4 hours after application
- Can be applied directly to rust affected metal
- Colour lock technology giving long lasting colour
Brand
Drying time
4 hrs
Coverage
Up to 7.5 m2 per litre
No. of coats
2
Size
750ml
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Hammerite Ultima Smooth is a water based formulation that provides a tough, durable and decorative coating for exterior and interior projects. Suitable for either non-ferrous or ferrous metals and is ideal for use on metal doors, gates, railings, garden furniture and more without the need to undercoat or prime the surface. It can also offer a protective coating that will last for up to 12 years that will guard against harsh and inclement conditions .
If you would prefer a matt finish then please try Hammerite Ultima Matt
Customers Also Bought
Preparation
Preparation
Back
To obtain optimum results, ensure surfaces to be coated are structurally sound, free from all poorly adhering or defective material and clean from dirt, grease, rust or paint.
- Put down dust sheets to protect any surfaces that are to remain unpainted
- Loose flaking rust or paint and debris will need to be removed prior to coating, using a wire brush, sanding or light blast cleaning
- If the metal surface is already painted then clean with a suitable detergent, thoroughly rinse and allow to dry
- Repair holes, cracks or imperfections to the surface substrate with a suitable metal filler and allow to harden
- Lightly abrade smooth metal surfaces to form a sound key. Rinse thoroughly and allow to dry
Please Note:
- In the case of new galvanised steel, let the surface weather until dull and then prepare the substrate with the instructions above
Application
Application
Back
Always perform a small test area to assess colour and compatibility of the finish.
Follow the manufacturer's instructions on the tin at all times.
- Ideally, apply between 10-30°c, avoiding extremes of temperature
- Stir the paint before applying, ensuring to work the sides and base of the tin to help a consistent mix
- Apply using a good quality synthetic brush or microfibre roller
- For best results, 2 thin coats are recommended
- Dilution is not required as the paint is supplied at the correct consistency
- Leave 4 hours drying time between coats
Datasheets
Datasheets
Back
Reviews
Reviews
Back
3 customer reviews
5.0/5.0
based on last 18+ months
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 star
0
Good value, excellent service
The paint was excellent and delivered as promised on time. I rate the paint and Wood Finishes Direct as extremely good, I highly rate them and would recommend them to others. They are honest and very helpful.
Terence Tong. Light Grey, 750ml (25/06/24)
Great product
Much easier to apply than I thought and a great finished look !
Simon Quinlan. Dark Grey, 750ml (15/09/23)
Good
It goes far and easy to use. One layer only on metal.
Marie-Christine Berg. Brown, 750ml (23/08/23)
Product Restock Notification
Enter your email address and we will email you when is back in stock.
Please enter a valid email address
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.