Crafted by Crown Lustrous Metallic 1.25L

Crown Crafted Lustrous Metallic Emulsion is an eye-catching shimmering metallic interior water based paint. Incorporating Crown's Breatheasy technology ensures the paint is environmentally friendly and is suitable for creating a feature wall, stencils and stripes.

If a matt finish is required then please consider Crafted by Crown Luxurious Flat Matt Emulsion. Alternatively, If a textured finish is needed then try Crafted by Crown Luxurious Suede Textured Matt Emulsion

To achieve the best results, clear the surface of debris such as flaking paint, seal holes and cracks and ensure the surface is dry.

• Remove all loose and defective paint with either using a scraper or paint stripper
• Special precaution needs to be taken during surface preparation of pre-1960s paint surfaces as they may contain harmful levels of lead
• Sand down any previous paint residue or rough areas to ensure a smooth surface
• Fill cracks and imperfections with a suitable filler
• If a cleaning product has been used the ensure the area is dry and free of any residues
• When applying to new plaster then prime the area with a coat of thinned emulsion diluted with 40% water to seal the new surface. It is possible 2 coats might be required, though this is dependant on how porous the new plaster is
• If painting onto a wooden surface then use a primer before applying Crown Crafted Lustrous Metallic Emulsion

Always start with a test area before application to judge suitability and preference. To achieve ideal results it is recommended to follow the manufacturers instructions.

Use only in well ventilated areas.

• For optimum results, stir thoroughly before applying the paint, ensuring the metallic pigment is thoroughly mixed and blended.
• Do not apply in room temperatures below 10°C and avoid humid conditions
• Can be applied with either a brush or a medium pile roller
• To ensure good coverage apply with even strokes to produce an even distribution of the paint
• 2 coats are recommended, however some colours may require additional coats for an opaque coverage
• Allow a minimum of 4 hours drying time between recoating

Regular Cleaning

• For standard cleaning, wipe with a slightly damp, lint free cloth

Maintenance

• If looking faded after a period of time, then simply reapply another coat following the instructions above