Projects (A-Z)
Brands (A-Z)
Craig and Rose 1829 Eggshell Paint
£23.00 - £56.50
£23.00 - £56.50
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
A water based eggshell paint producing a rich and sumptuous colour that can be used on walls, ceilings, interior and exterior wood and metal.
Features
- This product is mixed to order so cannot be returned
- An eggshell sheen which falls between Gloss and Matt
- Water based emulsion
- Apply with either a brush, roller or spray
- Can be recoated after 4 hours
- Medium VOC level
| Brand | Craig and Rose |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 12m² per litre |
| Drying time | 4 hrs |
| Size | 750ml, 1L, 2.5L |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Customers Also Bought
Previous
Next
Overview
An interior and exterior eggshell sheen emulsion that can be applied to a wide range of surfaces, such as walls, ceilings, woodwork and metal. With being hard wearing and washable, Craig and Rose 1829 Eggshell Paint proves to be a versatile and high quality choice.
Prefer a matt finish? Then why not try Craig and Rose 1829 Chalky Emulsion Paint
Preparation
To achieve optimum results, ensure surfaces to be painted are structurally sound, clean, dry and free from dirt, dust or any other surface contaminants.
- Remove all loose and defective paint by either using a paint scraper, paint stripper or sanding down the project area
- Special care should be taken if removing pre1960s paint as this could contain harmful levels of lead
- Repair any defects such as cracks or holes with a suitable filler to produce a surface free of imperfections and then sand to a smooth finish
- Any residue of oil or grease will need to be cleaned with a suitable detergent , rinsed and then allowed to dry thoroughly
- If the project area was a previously gloss or lustre painted surface, then abrade with sandpaper to provide a key
- It is recommended to use an undercoat to help Craig and Rose 1829 Eggshell Paint adhere to the surface if the project surface area is bare wood or plaster
- When applying to new plaster pre-mist the project area or seal the plaster with an appropriate plaster sealer
- If using two or more tins from different batches, then blend the paint together to ensure a consistent hue and tone of colour
Application
Always complete a test area before starting any project to judge the suitability and final finish of the product
Only use in a well ventilated area, ensuring that airflow is properly maintained to lessen any effects from the V.O.C fumes.
- Ensure the paint is well mixed, with the pigment being well blended with the emulsion medium, by stirring before the application and periodically throughout. It is advisable to also work the sides and the base of the tin to completely blend all areas of the paint.
- Apply Craig and Rose 1829 Eggshell Paint evenly with either a brush or a roller
- If the application is by a spray system then please refer to the manufacturer for the correct dilution ration
- Avoid overspreading during the application and distribute the paint evenly throughout the project area
- To clean the equipment after us remove any excess paint, wash with warm soapy water and rinse clean
Reviews
Back