Bona Natural Primer

Bona Natural Primer can be used for a range of interior projects where preserving the natural, raw or untreated look of the wood is desired. Although primarily designed for use with wooden flooring, this product can also be used for priming wooden doors, furniture and more.

Need an alternative type of primer for a different effect or for troublesome floor types? Consider one of the following Bona primers:

Ensure wooden surfaces to be treated are clean, dry and free from dust, dirt, grit and any other surface contaminants prior to application of Bona Natural Primer.

• For the best results, surfaces to be treated must be sanded back to bare wood
• Remove all traces of sanding dust with a vacuum cleaner prior to priming
• For filling gaps between floor boards and skirting boards, use Bona Gap Master
• For filing holes, splits, dents and other surface imperfections, use Bona Mix and Fill or Bona Mix and Fill Plus

Always do a test area before starting any project to assess product suitability and final finish. Follow manufacturer's instructions on the container at all times.

Allow product to reach room temperature. Optimal application conditions are between 18-25°C and 30-60% relative air humidity. High and low humidity and temperatures can shorten or lengthen drying times. Minimum temperature for use is 13°C.

1. Shake container well before use and insert the supplied filter
2. If required, pour the primer through a sieve
3. Apply the primer evenly, using a microfibre / fleece roller or Bona Swivel Head Applicator, avoiding accumulation of product
4. Allow to dry for approx. 2-3 hours and then lightly sand or denib using a sanding screen (grit 150 or finer) or the Bona Scrad system to reduce grain raise
5. Remove all loose sanding dust

Bona Natural Primer should not be used as the final treatment for wooden floors.

For the lightest, most natural looking finish, overcoat only with Bona Traffic HD Raw.