Bona Mix and Fill Plus

Bona Mix and Fill Plus

How much will I need?
x
Enter area above for 1 coat (Standard Protection)

Wood type and application can vary coverage

£88.15
You can still order and we'll send your goods as soon they're in stock. You can also set up a stock email reminder
Quantity
FREE Delivery over £60.Order by 5pm for next day option*
A waterborne wood filler for filling gaps in wooden floors. Ideal for use with most types of wood and for gaps up to 3mm wide.

Features

  • A water-based wood filler for filling gaps in wooden floors
  • Ideal for use with most types of wood and for gaps up to 3mm wide
  • Optimised for light to medium coloured timbers
  • Designed for mixing with wood dust
  • Quick drying and easy to sand
  • Anti-corrosive - no rust stains
  • Low VOC
Brand
Drying time
1h 30m
Coverage
Up to 10 m2 per litre
No. of coats
1
Size
5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option

Customers Also Bought

Osmo Polyx Oil Tints
(705)
£1.42 - £93.67
£1.42 - £98.60
Bona Mega Varnish
(279)
£4.40 - £94.75
Bona Traffic HD
(80)
£136.63

Overview

Overview

Back

Bona Mix and Fill Plus is a high solids wood filler for mixing with wood dust, for the quick and efficient filling of gaps and cavities in wooden floors. Can be sanded within 30 to 60 minutes of application and is suitable for a wide range of wood types including Oak and Pine.

  • Also available: Bona Mix and Fill the original formulation suitable for darker wood types
  • Alternatively, try Bona Gap Master For filling gaps between floor boards and skirting boards

Preparation

Preparation

Back

Ensure the floor to be filled is acclimatised to its end-use environment. Floors should be dry and free from dust, dirt, wax and any other surface contaminants.

  1. Sand the floor back to bare wood and to grit 60-80 (before making the final cut)
  2. Collect up the sanding dust for use with the Mix and Fill

Application

Application

Back

Always do a test area before starting any project to assess product suitability end result. Follow the manufacturer's instructions on the container at all times.

The temperature of the room and the product must not fall below 13°C during application and drying. Shake container thoroughly before use.

  1. Mix the product in a container with fine, clean wood dust to a smooth consistency
  2. Recommended mixing ratio is 10-15% wood dust to 85-90% filler
  3. Apply the mixture across the whole floor using a stainless steel trowel, such as the Bona Flat Bladed Trowel
  4. When the surface is dry, sand off all excess product using a 100 to 120 grit abrasive

Finishing

Finishing

Back

Once dry, Bona Mix and Fill Plus can be overcoated with any of the following Bona primers and/or floor varnishes:

Bona Floor Primers

Product Use
Bona Classic Primer A trade quality water-borne wood primer for use on all wood floors
Bona Natural Primer A wood floor primer designed to preserve the look of raw, untreated wood
Bona Intense Primer A high viscosity, single component, 100% polyurethane primer for wooden floors
Bona White Primer A high quality wood primer that creates a 'white-washed' effect on wood flooring
Bona Amber Primer A water-borne wood primer that produces a rich amber effect on wood flooring

Bona Floor Varnishes

Product Use
Bona Mega Varnish A clear, water-based, ready-to-use, polyurethane varnish for wooden flooring
Bona Traffic HD A two-part waterborne lacquer for heavy traffic environments
Bona Traffic HD Anti Slip A two-part, polyurethane anti-slip varnish for wooden floors and stairs

Bona Floor Oils

Product Use
Bona Craft Oil 2K A high performance, two-component base oil for wooden floors

F.A.Q.

F.A.Q.

Back
How does this differ from the normal Bona Mix & Fill?

The Mix & Fill Plus can be used to fill defects & gaps up to 3mm wide as opposed to 2mm on the normal Mix & Fill. Dry times also differ.

Reviews

Reviews

Back
4 customer reviews
4.5/5.0
based on last 18+ months
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 star
0
4/5
Useful stuff
A little surprised by how much product I need to mix in to get the right consistency (a little more than the recommended ratio after trial-and-error). Some 3mm gaps filled using the mixture came loose after sanding. It could be due to user error though!
Vivienne Tong. , 5L (22/05/25)
5/5
Great Product
Great product, easy to use, looks great.
Matthew Freeman. , 5L (16/08/24)
5/5
Purchased Finnes Hard Wax Oil Natural Great product
Excellent product, easy to apply and didn't change colour of wood/finish. i.e. no yellowing.
David Hilton. , 5L (24/06/24)
5/5
Useful
Good product - remember to clean up well round the edges as difficult to sand.
S E Richards. , 5L (16/12/18)