|No. of coats||1|
|Coverage||Up to 4m² per litre|
|Drying time||15 mins|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Barrettine Wood Reviver is a water-based gel that restores hard and soft woods to their natural tone before refinishing. Wood Reviver is suitable for both rough sawn and smooth timber that is greyed by harmful UV rays or weather damaged. Ideal for windows, sheds, fences, decking and outdoor wooden furniture.
Ensure that surfaces to be treated are clean and free from all surface coatings and contaminates before treating. Barrettine Wood Reviver may remove some existing wood finishes, however if surface coatings remain, use Paint Panther Paint and Varnish Remover or Barrettine PeelAway to remove oil, paint, varnish or wax. A test area is recommended before wider application.
Apply in weather conditions between 5-30°C, out of direct sunlight. Before applying Barrettine Wood Reviver, wet the wood with water. This will aid absorption and yield greater results.
As a precaution against inactive mould spores use Barrettine Mould and Mildew Cleaner. Wood restoration and the colour change may not be fully visible until the wood has dried. This can take up to 24 hours.
Please note: The appearance of the revived wood will vary depending on wood type, age and condition. A test area is always recommended before wider application. A light sanding may be required to restore a smooth finish.
After treatment of Barrettine Wood Reviver, it is vital that a wood preservative and/or top coat is applied to prevent further UV/weather damage. It is always advised to use a coloured finish where possible as these will have greater UV protection than clear options.
Depending on the area treated, any suitable Barrettine top coat can be applied, including, Barrettine Premier Wood Preserver, Barrettine Wood Protective Treatment, Barrettine UV Decking Oil, Barrettine Garden Furniture Oil or Barrettine Teak Oil for hardwood garden furniture.