|Up to 9.8m² per litre
Zinsser Cover Stain Aerosol is a quick drying coating for stains caused by fire smoke, water and nicotine on interior and exterior surfaces. Ideal for spot work on small areas on a range of surface, such as interior ceilings, walls door and furniture, and on exterior walls, doors, fascia's, soffits and railings. Will seal tanning bleed in cedar and redwood.
Please Note: When blocking stains caused by water or damp, make sure the original cause of the problem has been rectified.
For the best results, ensure surfaces to be coated are sound, clean and dry and free from all defective or poorly adhering material such as dirt, grease, paint or adhesives. If needed, clean surface using an appropriate ammoniated cleaning solution. Never use tri sodium phosphate based cleaners.
Always do a test area before starting any project to check product suitability and effectiveness. Follow the manufacturer's instructions on the tin at all times.
Only apply at temperatures ranging between 5°C and 32°C and a relative humidity of no more than 85%.
Turn the can upside down and spray for a few seconds, then wipe nozzle with a damp, lint-free cloth. To remove dried on primer, from surrounding areas use Zinsser B-I-N Brush Cleaner and Restorer.