Projects (A-Z)
Brands (A-Z)
A water-based interior stain for use on floors, stairs and furniture. Enhances the character of the wood.
Features
- A water-based, wood stain for interior woodwork and joinery
- Ideal for new, untreated and newly sanded wooden surfaces
- Penetrates deep into the surface to provide an intense colour
- Enhances the natural beauty of wood
- High V.O.C
Brand
Drying time
10 hrs
Coverage
Up to 10 m2 per litre
No. of coats
1
Size
2.5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Overview
Back
Woca Pre-Colour Stain is a decorative wood stain for all interior wooden surfaces. Ideal for use on floors, stairs, furniture, wood paneling and much more. Enhances the natural character and grain of the timber.
Preparation
Preparation
Back
Wooden surfaces to be stained must be clean, dry and free from all surface coatings and contaminates before applying Woca Pre-Colour Stain.
- New or previously oiled work tops can be lightly sanded back with a 120 grit sanding disk, screen or good quality sandpaper
- To remove existing paint or varnishes, use a suitable paint and varnish remover
- Ensure that all traces of sanding dust have been removed using a vacuum cleaner
- Following the product instructions, thoroughly clean the area first, using Woca Intensive Wood Cleaner or Woca Intensive Wood Cleaner Spray
- Allow to dry for at least 8 hours before applying the wood stain
Application
Application
Back
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the container at all times.
Ensure normal room temperature of 18-25°C and use only in well ventilated areas. This product is ready to use and does not require thinning.
- Mix thoroughly before and periodically during use
- Apply using a good quality application pad, working fully along and into the grain of the wood for an even finish
- It is recommended to use at least 1 litre of stain per 10m²
- When working on Vertical surfaces, always apply from top to bottom
- Allow to dry for 8 - 12 hours
- Lightly abrade / denib with a finishing pad or an abrasive, 120 grit, then vacuum thoroughly
Finishing
Finishing
Back
Woca Master Colour Oil must be applied to seal in the stain for full durability and longevity of the finish.
Datasheets
Reviews
Reviews
Back
1 customer reviews
5.0/5.0
based on last 18+ months
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
Easy to apply
Used this many times, it’s always a good go to for a consistent finish
Mark O'Callaghan. White, 2.5L (29/11/23)