Projects (A-Z)
Brands (A-Z)
Sikkens Cetol Novatop
£109.79
We no longer sell this product, please see below for alternatives.
A high solid, solvent-based wood finish for exterior use. Dries to a translucent, satin-gloss finish.
Features
- A high solid, solvent-based wood stain for exterior joinery
- Perfect for exterior doors and windows
- Dries to a translucent, semi-gloss finish
- Medium V.O.C
| Brand | Sikkens |
|---|---|
| No. of coats | 1 |
| Coverage | Up to 17m² per litre |
| Drying time | 16 hrs |
| Size | 5L |
| MPN | 5028157 |
| GTIN | 8711115144870 |
Overview
Sikkens Cetol Novatop. A flexible, durable high build woodstain designed for the protection and decoration of exterior joinery such as wooden window frames and doors.
This product system utilises a high solids, low solvent technology, one-coat finish for use over Sikkens Cetol Novatech, giving a flexible weather-resistant semi-gloss finish.
Preparation
Substrate should be treated with one coat of Sikkens Cetol Novatech prior to application. This ensures even application and coverage with the best possible bond to minimise chances of cracking and peeling.
Ensure that timber surfaces to be treated are clean, dry and free from surface dust, dirt, wax and grease. The moisture content should not exceed 18% prior to coating.
Do not apply if there is a risk of rain, or when air / substrate temperatures are below 5° or above 30° during application or drying periods. Protect from frost and rain until dry. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.
Application
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Sikkens Cetol Novatop is ready for use straight from the tin and does not require thinning. Stir thoroughly before and during use to ensure a consistent finish.
- Apply 1 coat using a good quality, synthetic bristle brush in the direction of the wood grain
- Allow 16 hours to drying time
Aftercare
For best results, it is recommended that the Cetol Novatech/Novatop system is re-applied every 2-3 years.
- When looking to maintain the coating, take note of the current condition of the finish
- Then clean, degrease with methylated spirit and sand to create a key
- If excessive weathering has occurred leaving a grey appearance, the surface must be abraded back to clean bare timber before re-coating. Repair any defects with a suitable putty/wood filler and apply one coat of Sikkens Cetol Novatech to patch repair colour
- Finish with one coat of Sikkens Cetol Novatop
Reviews
Back