Sandtex 10 Year Exterior Multi-Surface Satin Paint

Sandtex 10 Year Exterior Multi-Surface Satin Paint is specially formulated to provide up to 10 years trusted durable protection for multiple surfaces in a soft low sheen finish. Its advanced technology is mould resistant and flexible to resist cracking and flaking making it ideal for use on wood, weathered PVC-u, brick, concrete, stone, aluminium and non-ferrous metal.

Before applying Sandtex 10 Year Exterior Multi-Surface satin paint, the surface needs to be clean, dry and free from dirt, grease and surface contamination. previously painted wood and metal must be thoroughly abraded to provide suitable adhesion.

• Fill all voids and gaps with a suitable exterior filler
• Grey denatured timber will need sanding back to a clean surface. For bare wood ensure wood is dry and treat knots and resinous parts with a knotting solution
• For non-ferrous metal surfaces (excluding galvanised) thoroughly abrade then wash with hot water and liquid detergent to remove contaminants
• Powdery and chalky surfaces must be stabilised with Sandtex Quick Drying Stabilising Solution
• If using on ferrous metal or copper use a specialist primer first

Always do a test area before starting any project to check suitability and compatibility.

• Ensure that the paint is well mixed beforehand by stirring the paint, and always follow the manufacturer's instructions
• Apply using a good quality synthetic brush or a short / medium pile roller
• Apply evenly and avoid overspreading
• For best results, 2-3 coats are recommended. Allow 4-6 hours drying time between coats, ensuring the previous coat is dry before application
• Do not use in temperatures below 8°C or in high humidity
• This product will provide up to 10 years protection, provided the manufacturer's instructions are fully carried out
• If you're using more than one batch of paint in the same area, mix them together in a large container to ensure you get consistency of colour

You can use the Sandtex Multi-Surface Paint on a variety of surfaces, including concrete slabs, without the need for a primer or undercoat. You must consider the usage of the surface as this is not durable enough to be used underfoot. If the surface is to be walked over, consider Dulux Trade High Performance Floor Paint which can be used on this type of substrate