Projects (A-Z)
Brands (A-Z)
A tough and durable enamel spray paint for radiators, in a handy spray. Resistant to heat, water and rust
Features
- An enamel paint for use on interior radiators
- Protects radiators from rust
- Ultra tough, heat resistant finish
- Helps protect against knocks, scuffs and scratches
- Water resistant and washable surface
- Offers a brilliant white satin finish
Brand
Drying time
24 hrs
Coverage
Up to 2 m2 per litre
No. of coats
2-3
Size
400ml
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Overview
Back
Rust-Oleum Radiator Enamel is an ultra-tough enamel specially formulated for all household radiators, including primed, factory finished and previously painted radiators.
Preparation
Preparation
Back
Ensure that radiators are turned off and cold prior to painting with Rust-Oleum Radiator Enamel. Surfaces to be painted should be clean, dry and free from dirt, grease and other surface contaminants.
- Put down dust sheets to protect any areas not to be painted
- Mask off the surrounding areas to avoid over-spraying
- Give the area to be painted a quick sanding and remove any dust prior to painting
- Open up doors and windows to allow for good ventilation during painting and drying
Application
Application
Back
Always do a small test area to assess colour and compatibility of the finish. Follow the manufacturer's instructions on the can at all times.
- Shake the spray can well until you can hear a rattle, then continue shaking for 1 minute
- Hold can 20 - 30cm away from the surface and spray in a sweeping motion, slightly overlapping each stroke
- Ensure the can is kept the same distance from the surface and keep the can in motion to achieve the best results
- Apply 2 - 3 coats, allowing a few minutes between each coat
- If needed, recoat within 1 hour or after 24 hours
- Leave to dry for 24 hours before you turn the radiators back on
Cleaning Equipment
Turn can upside down and spray for a few seconds. Then wipe the nozzle with a dampened, lint-free cloth.
F.A.Q.
F.A.Q.
Back
Is the Radiator Enamel any good for infrared panel heaters? I've used others and they yellow
Can the Rust-Oleum Enamel Paint go on a fridge door to replair some chipped paint?
As a solvent-based paint it can yellow over time if kept out of sunlight. Instead, you may wish to consider Ronseal Stays White Radiator Paint.
Can the Rust-Oleum Enamel Paint go on a fridge door to replair some chipped paint?
This product has not been tried and tested on this type of surface. If the door panel is bare and shows metal, we would recommend something slightly different where we can ensure its compatibility such as Bedec MSP Multi Surface Paint.
Datasheets
Datasheets
Back