Ronseal One Coat Wood Primer and Undercoat is for use on bare and previously painted interior wood surfaces. It is ideal for skirting boards and architraves, only requires one coat and dries in just 2 hours ready for over-coating.
Ensure that surfaces to be primed are clean, dry, and free from any dirt, dust or other surface contaminants. Make sure room temperature is above 10°c. Put down dust sheets to protect areas not to be painted.
Always do a small test area before beginning any project to assess adhesion and overall performance. Follow the manufacturer's instructions on the tin at all times. Stir thoroughly before use.
Once fully dry, Ronseal One Coat Wood Primer and Undercoat can be overcoated with a suitable Ronseal top coat, such as Ronseal Stays White Ultra Tough Paint or Ronseal Stays White One Coat Non Drip Paint.
This should be fine however an extra coat may be required due to the nature of MDF.
Enter your email address and we will email you when is back in stock.
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.