Projects (A-Z)
Brands (A-Z)
Ronseal One Coat Shed and Fence Protector
- Select Colour...
- Charcoal Grey
-
Dark Oak -
Forest Green -
Harvest Gold -
Medium Oak -
Red Cedar -
Tudor Black Oak
How much will I need?
£19.43
Quantity
FREE Delivery over £60.Order by 4pm for next day option*
A one coat product that offers colour and protection to rough sawn sheds and fences for up to two years
Features
- 100% showerproof in one hour
- Keeps its colour for up to two years
- Protects your wood from greying
- Can be brushed or sprayed
- Comes in a range of natural colours
- Matt finish
- Low V.O.C
Brand
Drying time
4 hrs
Coverage
Up to 6 m2 per litre
No. of coats
1
Size
9L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Customers Also Bought
Overview
Overview
Back
Ronseal One Coat Shed and Fence Protector will protect your shed or fence from rain and prevent it greying in the sun. Ronseal One Coat Shed and Fence Protector can be used on any new or previously stained rough sawn wood however you can't use this stain on decking, garden furniture or other smooth planed wood.
Preparation
Preparation
Back
Surfaces should be cleaned with warm water, detergent and a stiff brush. Make sure that all mould or algae is removed and rinse substrate well. For the best results, previous treatments should be removed or well weathered.
Application
Application
Back
Always do a test area before starting any project to check product suitability and final finish. Always follow the manufacturer's instructions.
Cold wet weather stops the stain from drying and could wash it off. It needs to be a warm day with the temperature above 10°C and no rain is forecast.
Ronseal One Coat Fence Life can be applied with a Ronseal Fence Life Brush, or can also be spray applied with the Ronseal Pump Sprayer.
Brushing:
- Apply a generous amount of stain to your brush and apply a thick coat to your wood but don't spread it too far
- After one hour, it will be 100% showerproof. It takes four hours to dry fully
- If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if a second coat is required
Spraying:
- Pour the stain into the tank
- Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish
- Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage
Please note: If you want to cover up a bright, strong or contrasting colour, you may need to use extra coats.
Aftercare
Aftercare
Back
Regularly inspect your wood for signs of damage. If you notice any, just apply another coat of the stain to protect the wood.
Datasheets
Datasheets
Back