Ronseal Multi Purpose Wood Filler can be used for any small wood repairs. If the hole is deeper than 5mm, simply build up in layers.
Lightly sand the area to be filled, then wipe with a damp, lint-free cloth and allow to dry. The area should be clean, dry and free from dust, dirt or any other surface contaminants prior to filling.
Always do a small test area before beginning any project to assess the colour and compatibility of the filler once dry. Follow the manufacturer's instructions on the tub at all times.
Wash your tools in warm, soapy water. Make sure you put the plastic film back over the filler and tighten the lid so it does not dry out.
Once dry, filled surfaces can be overcoated with a suitable Ronseal wood paint, stain or varnish.
You should try to match the filler to the natural colour of the wood for the best chance of the stain colouring the timber and the filler in the same manner.
Enter your email address and we will email you when is back in stock.
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.