|No. of coats||2|
|Coverage||Up to 18m² per litre|
|Drying time||12 hrs|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Polyvine Woodstain Oil is ideal for use on interior and exterior softwood and hardwood furniture, windows, doors, floors, cladding, fencing, fascia boards and joinery.
Please note: Some of the tins supplied by Polyvine have the old label that states 'exterior' only. This product is suitable for interior and exterior use as per the new product label.
Timber surfaces to be treated should be clean, thoroughly dry and free from dust, dirt, grease, oil or any other surface contaminants.
Always do a test area before starting any project to asses product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. Do not apply to exterior wood when rain is imminent. Do not apply at temperatures below 5°C.
Please note: Timbers containing high natural oils, e.g. Teak and Iroko, may inhibit drying and cause impaired penetration. Wiping these timbers with methylated spirit will assist penetration.
Application rollers, sponges, pads and clothes soaked in this product, may spontaneously combust if left. Dispose of applicators after soaking in water then allowing to dry in a safe environment.
If the finish starts to show signs of wear or starts losing it's protective or water-resistant qualities over time, apply a fresh coat of Polyvine Woodstain Oil. Ensure the area is clean and dry. If required, the area to be restored can be lightly sanded or cleaned with a dedicated wood cleaner to remove any stubborn or ingrained surface dirt. Then follow the 'preparation' & 'application' instructions above.