Projects (A-Z)
Brands (A-Z)
Polyvine Varnish and Paint Remover
An Ultra-low VOC varnish and Paint Remover suitable for a wide range of surfaces, both internal and external
Features
- Removes multiple coats
- No ventilation required
- Household safe
- No fumes
- Ultra-low solvents
- Non-toxic
- Ultra-low VOCs
Brand
No. of coats
1
Size
1L
2L
4L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Polyvine Varnish and Paint Remover uses innovative technology that removes all hazardous solvents and alkalis and replaces with water, making this a safe and environmentally responsible product. It is the perfect household-friendly Varnish and Paint Remover, designed to be used on a range of surfaces including floors, doors, walls, furniture and more. Suitable for use both on internal and external substrates.
Safe to use on any type of surface - .Wood (hard & soft) - Marble - Stone - Brick - Concrete - Plaster - Ceramic Tiles - GRP - Aluminium - Brass and other soft metals.
Customers Also Bought
Preparation
Preparation
Back
Areas to be stripped should be cleaned to remove any surface dirt and debris that may restrict contact with Polyvine Varnish and Paint Remover.
- Ensure that any surfaces not intended to be stripped are covered and protected from this product
- For prolonged use, or if removing toxic and or lead-based paints wear suitable personal protective equipment
Application
Application
Back
Always do a test area to assess performance and compatibility before starting any project. Follow the manufacturer's instructions at all times. Do not leave longer than recommended on veneered surfaces.
- Shake well to allow product to flow
- Apply liberally with a brush
- The product will need to be left on the surface between 30 to 45 minutes before removing
- Remove after required time with a scraper or a stainless steel scouring ball, do not use wire wool as this will cause rust to penetrate into wooden surfaces
- If required, apply a further coat and repeat
- Covering with a plastic film will assist in keeping the product adhered to the surface
- Once the surface has completely dried out, wash off any residue with a damp cloth or water
- Use sandpaper to remove any small traces of finish
Please Note: Cleaning of intricate carvings or mouldings is improved by wrapping in plastic sheeting (cling film or foil) and leaving over night. No special treatment after treatment required. Simply wash down with a wet cloth or, if using on external surfaces, use either a pressure hose or a plastic brush and a bucket of water.
Recommended stripping times
- Multi-layered paint: 1 hour to overnight
- Wood Stains, Varnishes, Lacquers, Shellac: 15 - 30 minutes
- Polyurethanes & Acrylics: 30 - 45 minutes
The above times are approximations and subject to substrate.
Product Restock Notification
Enter your email address and we will email you when is back in stock.
Please enter a valid email address
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.