Polyvine Varnish and Paint Remover

Polyvine Varnish and Paint Remover uses innovative technology that removes all hazardous solvents and alkalis and replaces with water, making this a safe and environmentally responsible product. It is the perfect household-friendly Varnish and Paint Remover, designed to be used on a range of surfaces including floors, doors, walls, furniture and more. Suitable for use both on internal and external substrates.

Safe to use on any type of surface - .Wood (hard & soft) - Marble - Stone - Brick - Concrete - Plaster - Ceramic Tiles - GRP - Aluminium - Brass and other soft metals.

Areas to be stripped should be cleaned to remove any surface dirt and debris that may restrict contact with Polyvine Varnish and Paint Remover.

• Ensure that any surfaces not intended to be stripped are covered and protected from this product
• For prolonged use, or if removing toxic and or lead-based paints wear suitable personal protective equipment

Always do a test area to assess performance and compatibility before starting any project. Follow the manufacturer's instructions at all times. Do not leave longer than recommended on veneered surfaces.

1. Shake well to allow product to flow
2. Apply liberally with a brush
3. The product will need to be left on the surface between 30 to 45 minutes before removing
4. Remove after required time with a scraper or a stainless steel scouring ball, do not use wire wool as this will cause rust to penetrate into wooden surfaces
5. If required, apply a further coat and repeat
6. Covering with a plastic film will assist in keeping the product adhered to the surface
7. Once the surface has completely dried out, wash off any residue with a damp cloth or water
8. Use sandpaper to remove any small traces of finish

Please Note: Cleaning of intricate carvings or mouldings is improved by wrapping in plastic sheeting (cling film or foil) and leaving over night. No special treatment after treatment required. Simply wash down with a wet cloth or, if using on external surfaces, use either a pressure hose or a plastic brush and a bucket of water.

Recommended stripping times

1. Multi-layered paint: 1 hour to overnight
2. Wood Stains, Varnishes, Lacquers, Shellac: 15 - 30 minutes
3. Polyurethanes & Acrylics: 30 - 45 minutes

The above times are approximations and subject to substrate.