We're Open and delivering safely
Projects (A-Z)
Brands (A-Z)
Customers Also Bought
Polyvine Acrylic Enamel Paint
A durable enamel paint for use with a wide variety of interior and exterior surfaces. Intermix colours to create new shades.
Features and Highlights
- A tough and durable enamel paint for both interior and exterior surfaces
- For use on most solvent-based products, such as laminate, metal, plastic, tile and more
- Ultra hard coating, resistant to heat, water, stains and abrasion
- Safe for use on children's toys
- Can be brush or spray applied
- Low odour
- Low V.O.C
| Brand | Polyvine |
|---|---|
| No. of coats | 2-3 |
| Coverage | Up to 15m² per litre |
| Drying time | 2 hrs |
| Size | 20g, 50g, 100g |
| MPN | Please Select Size/Option |
| GTIN | Please Select Size/Option |
Datasheets
Overview
Polyvine Acrylic Enamel Paint is a high quality coating suitable for a wide range of interior and exterior surfaces, such as wood, laminate, plastic, metal, glass, ceramic and tiles. Its versatility means it can be used on all solvent-based surfaces around the home.
These enamels can be mixed with other colours in the range to achieve 1,000's of new shades.
- Need a concentrated colourant for use on projects around the home? Use Polyvine Acrylic Colourant
- To create a frosted glass effect on interior glass and plastic, use Polyvine Glass Frosting
Preparation
To get the best results, ensure surfaces to be painted are sound, clean, dry and free from all defective or poorly adhering material, such as rust, dirt, grease and wax.
Previously Painted Surfaces
- Thoroughly rub down previously painted surfaces, wipe off with a damp, lint-free cloth to remove all traces of sanding dust
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
Application
Always do a test area before starting any project to assess product suitability, colour and final finish. Follow the manufacturer's instructions on the container at all times.
- Stir the product thoroughly before use
- Use a suitable container to mix colours in, if needed
- Apply 2-3 full coats using a good quality synthetic brush or spray system
- On porous surfaces dilute the first coat with 10% water
- Wipe off any excess enamel paint as you go with a clean, lint-free cloth
- Allow to dry for 1-2 hours
Application equipment can be cleaned using soap and water. Once cleaned, allow to dry naturally.
Back