Projects (A-Z)
Brands (A-Z)
Osmo Polymer Composite Maintenance Oil
£27.29
Quantity
|
|
FREE Delivery over £60.
Order by 4pm for next day option*
Order by 4pm for next day option*
Ideal protection against dirt and stains
Features
- Suitable for maintaining and restoring weathered wood polymer composites
- Makes the surface water repellent
- Protects against dirt and stains to the surface
- 10 hour drying time
| Brand | Osmo |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 40m² per litre |
| Drying time | 10 hrs |
| Size | 1L |
| MPN | 030C |
| GTIN | 4006850089185 |
Customers Also Bought
Previous
Next
Overview
Osmo Polymer Composite Maintenance Oil 030 is a clear satin oil that penetrates the substrate and forms a protective barrier. Through impregnation the surface area is protected from dirt, oil and grease whilst also becoming water repellent.
Please note:
- Oils enhance the natural colour of a substrate and produce a permanent wet effect appearance
- Trial application is recommended
- White or very light coloured surfaces can appear to be slightly yellowed by the oil
- Non-absorbent surfaces, such as glass, glazed tiles or plastics cannot be treated
- The impregnation of the oil could influence the slip resistance of the original surface
Preparation
Ensure the project area is sound, clean, dry and free from dust, frost and debris.
- Remove any loose debris from the project area with a suitable cleaning instrument, such as a stiff bristled brush
- Ensure the project area is weathered by abrading the surface to aid with absorption
- It is recommended to clean the project area with Osmo Polymer Composite Cleaner (8021)
- Osmo Polymer Composite Maintenance Oil is ready to use with no need for dilution
- Rinse the project area thoroughly with clean water and allow to dry
Application
Always perform a test area to judge suitability and the final finish. Also, for the best results, please follow the manufacture's instructions
- Apply with the use of a Osmo Floor Brush or Osmo Soft Tip Brush
- Osmo Polymer Composite Maintenance Oil needs to be applied very thinly to aid absorption and needs to absorbed into the surface
- Ensure there is no residue left on the surface or within the grooves
- If there is any pooling of residue then use a dry brush to remove any excess oil
- Ensure good ventilation to the project area to aid with drying
Excess oil can be very slow drying and will produce a glossy layer with poor adhesion to the substrate
Datasheets
Reviews
Back