Projects (A-Z)
Brands (A-Z)
A quick drying, water based varnish for interior surfaces that protects against scratches and knocks
Features
- Water based Polyurethane varnish giving an acrylic finish
- Suitable for interior wooden floors, furniture and joinery
- Tough, hard wearing and durable
- Quick drying with being nonyellowing
- Suitable for all interior high traffic areas, such as hallways and corridors
Brand
Drying time
3 hrs
Coverage
Up to 8 m2 per litre
No. of coats
2
Size
1L
2.5L
5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Customers Also Bought
Overview
Overview
Back
Fiddes Premier Wood Varnish is a water based polyurethane varnish suitable for interior spaces, wooden furniture and joinery. Formulated to be non-yellowing and hard wearing, it is suitable to be applied by either a high quality oil brush or a good quality bristle or synthetic brush.
Preparation
Preparation
Back
Ensure that the floor to be treated with Fiddes Premier Wood Varnish is clean, dry and free from wax, polish, dirt and other contaminants prior to application.
- Fill any holes, cracks or surface imperfections with a suitable wood filler and allow to fully cure
- Sand any areas of repair level and smooth with the surrounding wood
- If necessary, apply a detergent to remove any traces of oil, grease or dirt, rinse clean and allow to thoroughly dry
- It is recommended to sand the project area with either 120 or 150 grit sandpaper to provide a key
- Remove all traces of sanding dust with either a brush vacuum cleaner
- If needed, wipe the project area down with a damp lint free cloth to remove any dust and allow to dry
Application
Application
Back
Always make a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Do not apply at temperatures below 10°C and allow for good ventilation. Stir contents of the tin thoroughly, ensuring to work the sides and base of the tin, before and during the application to ensure a consistent finish.
- Apply the varnish thinly and evenly, using a good quality synthetic brush and finish in the direction of the wood grain
- If being applied to wooden floors, start in the corner furthest from the door and work along the length of 2 floor boards at a time to avoid overlaps
- Avoid over-brushing as this will spread the finish too thinly and affect performance
- For softwood species of wood it is recommended to apply 3 coats of Fiddes Premier Wood Varnish, otherwise only 2 coats are recommended
- Before the final coat, lightly rub down with 240 grade abrasive paper, then wipe over with a damp lint-free cloth and allow to dry
Datasheets
Datasheets
Back