Projects (A-Z)
Brands (A-Z)
Dulux Trade Wood Primer
A solvent-based primer offering excellent adhesion to all softwoods and hardwoods, on both interior and exterior surfaces.
Features
- A solvent-based primer for interior and exterior use
- Suitable for all types of softwoods and hardwoods
- Provides excellent adhesion between the substrate and top coat
- Prepares bare and previously painted surfaces for top coat finishes
- High V.O.C
Brand
Drying time
20 hrs
Coverage
Up to 15 m2 per litre
No. of coats
1
Size
1L
2.5L
5L
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Overview
Dulux Trade Wood Primer is a solvent based, general purpose primer, suitable for use on all types of softwoods and hardwoods. For both interior and exterior use.
- For interior and exterior resinous woods, use Dulux Trade Aluminium Wood Primer
- Looking for an alternative primer? Take a look at our range of Dulux Trade Primers
Please Note: Specialist primers may be needed for highly resinous woods.
Preparation
Preparation
Back
For the best results, ensure surfaces to be primed are clean, dry (new surfaces particularly must be fully dry) and free of dirt, grease or wax before treating.
- Thoroughly rub down previously painted surfaces, using wet flatting methods where possible, then wipe off with a damp, lint-free cloth or vacuum to remove all traces of sanding dust
- Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead
- Any surface defects should be filled with an appropriate wood filler
- Treat any knots in wood with an appropriate knotting solution
Application
Application
Back
Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times.
Do not apply at temperatures below 5°C. For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended.
- Stir the undercoat thoroughly before and periodically during use
- Apply a single, even coat of Dulux Trade All Purpose Primer with a good quality synthetic paint brush or microfibre roller
- Allow 16 to 24 hours for the undercoat to fully dry
- Follow up with 1 or 2 coats of a chosen top coat
Aftercare
Aftercare
Back
Once fully dry, primed surfaces can be over-coated with a suitable Dulux Trade top coat
Datasheets
Product Restock Notification
Enter your email address and we will email you when is back in stock.
Please enter a valid email address
This information will not be shared and you will not be signed up to our mailing list.
Thank you! We'll send you an email as soon as is back in stock.