Craig & Rose Artisan Chalk Wash Effect

To achieve the best results the surface needs to be clean, structurally stable and free of dirt, dust and surface impurities

• Remove any old, substandard and defective paint by either using a paint scraper, paint stripper or sanding down the project area
• Extra caution should be taken if removing pre 1960s paint as this could contain hazardous levels of lead
• If the project area shows signs of grease or oil, then wash with a suitable detergent and allow to dry thoroughly
• Repair any defects such as cracks or holes with a suitable filler to produce a surface free of imperfections
• If necessary, sand the project area to produce a flat smooth surface
• When applying to new plaster pre-mist the project area or seal the plaster with an appropriate plaster sealer
• If using two or more tins from different batches, then blend the paint together to ensure a consistent hue and tone of colour
• Apply your chosen base colour, such as Craig and Rose 1829 Chalky Emulsion Paint ensuring that the steps needed for applying this paint are followed
• Once the base coat has been applied, give sufficient drying time with a minimum of 7 days before applying Craig And Rose Artisan Chalk Wash Effect to give the basecoat sufficient time to fully cure and harden

Always do a test area before starting any project to assess the suitability of the product and the finish.

Use only in well ventilated areas with a room temperature that will exceed 10ºC during the drying period.

• With starting in the top left hand corner apply Craig And Rose Artisan Chalk Wash Effect using a wide brush, 50-75mm (2-3 inches), in a random pattern
• It is important to guarantee that a coverage is achieved and that no areas are left uncovered
• Once the application process has been started it is important to continue until the entire area is covered, without pausing or stopping
• Apply in 1 metre areas and whilst Craig And Rose Artisan Chalk Wash Effect is still damp, use either a muslin cloth or sponge to create the desired pattern effect
• If a muslin cloth is used then regularly re-scrunch the cloth to change and alter the shape
• Ideally, the application can be performed by 2 people, with one person applying Craig And Rose Artisan Chalk Wash Effect followed closely the the second person with the muslin rag or sponge
• Only one need to be applied and avoid going over completed work for a second time