|Up to 10m² per litre
|Please Select Size/Option
|Please Select Size/Option
Bona Mega ONE focuses on simplifying the working day for quicker and easier jobs with greater reliability. It has a slight warming colouration and establishes long-lasting protection for wooden floors in domestic and medium wear commercial environments.
Please note: for floors where there is a risk of sidebonding, e.g. endgrain floors, softwood plank floors and hardwood floors with underfloor heating, it is recommended to always use a primer before applying Mega ONE.
Previously waxed, polished or oiled floors cannot be overcoated with Bona Mega ONE unless sanded back to bare wood.
For application to softwood plank floors, endgrain floors and hardwood floors with underfloor heating, it is recommended to always use a primer. Primers help with adhesion between the varnish and floor and can help with the colouration of the final finish. Bona Mega ONE is compatible with the following Bona floor primers:
|Bona Classic Primer
|A ready-to-use primer for use with the Bona range of varnishes
|Bona Intense Primer
|A 100% polyurethane based primer for finishes requiring better adhesion
|Bona White Primer
|A high quality wood primer that creates a 'white-washed' effect on wood flooring
|Bona Amber Primer
|Wood primer for oak and darker tropical species of wood. GreenGuard approved
|Bona Natural Primer
|Designed to preserve the impression of raw, untreated wood
Always do a test area before starting any project to check product suitability and final finish. Shake well before use. Ensure room temperature does not fall below 13°C during application and drying. Thoroughly read and follow the manufacturer's instructions on the container at all times.
The following applicators are recommended for application of Bona Mega ONE:
|Bona Swivel Head Applicator
|A specialist 46cm floor applicator for professional floor finishers that is used in conjunction with the Bona Applicator Sleeve.
|Bona Lacquer Roller
|A synthetic, medium pile roller for the application of Bona varnishes.
Please Note: If the previous layer of finish has been allowed more than 24 hours drying time then an intermediate sanding is always required. The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor until after this time.
Wooden floors should never be saturated with water as part of a cleaning routine as this will significantly reduce longevity and performance of the finish. Never use household cleaners / detergents as these may degrade or damage the finish.
For optimal performance, floors coated with Bona Mega ONE will benefit from being cleaned with one of their floor mops and specifically formulated, pH balanced wood floor cleaners.
|Bona Cleaner Concentrate
|A concentrated version of Bona Wood Floor Cleaner. Add water to clean up to 2,000 square meters of flooring per liter of concentrate
|Bona Wood Floor Spray Mop
|An easy to use spray mop with changeable or refillable cartridge
|Bona Wood Floor Cleaner Spray
|An everyday floor cleaner in a convenient 1L trigger spray bottle
Floors treated with Bona Mega ONE that have become dull or tired looking over time can be restored with the following products.
|Bona Freshen Up
|A ready-to-use, maintenance coat to refresh the appearance of Bona Mega Varnish
|Bona Wood Floor Refresher
|A durable and protective maintenance coat that is ready-to-use, offering extended protection against wear.
|Creates a durable wear layer for previously varnished floors. Available in both a Matt and Gloss finish
|Bona Wood Floor Polish
|A ready-to-use, water-based maintenance coating for previously varnished wooden floors