|No. of coats||2|
|Coverage||Up to 24m² per litre|
|Drying time||8 hrs|
|Size||125ml, 750ml, 2.5L|
|MPN||Please Select Size/Option|
|GTIN||Please Select Size/Option|
Osmo Polyx Oil Anti Slip is an extremely versatile oil that's made from a blend of natural vegetable oils and waxes and forms part of Osmo range of interior finishing oils. This product is especially useful for entrance hallways, wooden steps, staircases and commercial environments, such as shops and restaurants where slip-resistance is a priority.
Please Note: The R9 offers more slip resistance than regular Osmo Polyx Oil. The R11 offers the most slip resistance out of the Polyx Oil range.
The 125ml sample tin labels are sometimes printed in German.
|Osmo Polyx Oil||The original, clear hardwax oil for most interior wooden surfaces|
|Osmo Polyx Oil Tints||Available in wood tone colours, perfect as a base coat or can be intermixed to create different shades|
|Osmo Polyx Oil Raw||Designed to better retain the natural "untreated" look of lighter coloured timbers such as pines & oaks|
|Osmo Polyx Oil Rapid||Cut drying times in half, for when speed is of the essence|
|Osmo Polyx Oil Express||Osmo's fastest ever drying product|
Surfaces to be treated with Osmo Anti-Slip Oil must be clean, dry and free from dust, dirt and other surface contaminants before application. Surfaces must be frost-free (maximum moisture content 20%).
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times.
Osmo Polyx-Oil Anti-Slip is ready-to-use from the tin and does not require thinning. Stir thoroughly prior to and during application. Osmo oils dry via oxidation so it is important to ensure good ventilation during application and drying.
The ideal application tool is a firm, fine, natural bristled brush, however the key to a great finish is thin application with removal of any surplus.
Cork tiles are best treated before fitting to avoid overlapping treatment of edges, which would lead to prolonged drying times. A cork floor treated with Osmo Polyx-Oil will get a robust, elastic and wear-resistant surface which will harden further over 2-3 weeks. Due to the extreme absorption power of this highly elastic, natural material we recommend the following procedure:
For daily maintenance a duster, mop or vacuum cleaner will be sufficient. For commercial premises, an electric floor polisher can be used.
For optimal cleaning of floors treated with Osmo Polyx Oil, we recommend the Osmo Spray Mop or Osmo Floor Maintenance Kit.
For regular cleaning, we recommend using Osmo Wash and Care (8016) or Osmo Spray Cleaner (8026).
Please Note: Oiled or waxed surfaces should not be cleaned with a steam cleaner or steam mop as this degrades the performance of the finish.
Renovating, even partially, is easy. Just clean and re-treat worn areas with a thin coat of Osmo Polyx Oil Anti Slip.
Q. Can I use a steam cleaner or steam mop to clean my oiled floor?
A. In short, 'No'. Oiled and waxed finishes on floors are 'Micro-porous' which means that although the wood is protected, it can still breath as it is not completely sealed as it would be with a varnish.
Cleaning oiled or waxed floors with a steam cleaner or steam mop introduces high temperature and pressure water which can strip and penetrate the oiled or waxed finish and potentially damage the wooden floor.
Q. Can I store any remaining product?
Osmo oils dry via oxidation so it is important to store the Polyx Oil with no or minimal air "surrounding" it. As such pouring the remaining oil into a smaller air-tight container (tin or glass jar) to the top, will help to preserve any remaining oil.