Projects (A-Z)
Brands (A-Z)
ArmourFlex Natural Floor Varnish
£76.99
£76.99
We no longer sell this product, please see below for alternatives.
A water-based floor varnish for domestic and light commercial wooden floors. Natural finish for minimal colour change.
Features
- A ready-to-use, single-part water-based floor varnish
- Suitable for wooden floors in heavy domestic and light commercial settings
- Highly resistant to scratches and stains
- Extremely durable and hard wearing
- A natural, non-yellowing finish
- Self priming
- Medium V.O.C
| Brand | ArmourFlex |
|---|---|
| No. of coats | 2 |
| Coverage | Up to 10m² per litre |
| Drying time | 16 hrs |
| Size | 5L |
| MPN | AFNG005 |
| GTIN | 5015861005151 |
Overview
ArmourFlex Natural Floor Varnish is a professional, water-based floor varnish for domestic and light commercial use. It reacts with the oxygen in the air to create internal cross-links for a super strong, yet flexible coating. It also utilises a unique blend of ceramic particles in the formula to provide greater strength and protection from stains.
ArmourFlex Natural Floor Varnish has a natural tone that minimises any colour change to the wood. For a varnish that emphasises the natural colour and character of the wood, consider ArmourFlex Enriched Floor Varnish.
Please note: This product can be used on veneered or engineered flooring but not laminated flooring.
Preparation
Previously waxed, polished or oiled floors cannot be overcoated with ArmourFlex Natural Floor Varnish unless sanded back to bare wood. Floors to be varnished must be clean, dry and free of all dust, dirt and other surface contaminates.
- Sand floors back to bare wood, using P60/P80, removing all previous coatings
- Final sanding should be done with a P120 sanding disc, screen or good quality sandpaper
- Fill all gaps and splits in the wood with a suitable filler and sand smooth if necessary
- Use a vacuum cleaner to remove all traces of sanding dust from the area to be varnished
- Shake container thoroughly and allow bubbles to settle before use
Application
Always do a test area before starting any project to assess product suitability and final finish. Thoroughly read and follow the manufacturer's instructions on the container at all times.
- Apply thinly using ArmourFlex Velour Roller Sleeve or a t-bar floor applicator
- Start at the edges and then roll with a smooth flowing action across and with the grain of the wood
- Allow to dry for 2 hours before applying a second coat
- If necessary, lightly sand or denib using a disc sander or sanding screen at P240 or finer before applying the final coat
- Allow 16 hours dry time before resuming foot traffic to newly treated area
Aftercare
Wooden floors should never be saturated with water as part of a cleaning routine as this will significantly reduce longevity and performance of the finish. Never use household cleaners / detergents as these may degrade or damage the finish.
Floors treated with ArmourFlex Natural Floor Varnish can be easily cleaned with the ready-to-use formula in a spray bottle, ArmourFlex Wood Floor Cleaner Spray. Simply hoover and mop as part of your normal cleaning routine.
Back